Related Manuals for Allen-Bradley ArmorBlock A Series
Summary of Contents for Allen-Bradley ArmorBlock A Series
-
Page 1: Table Of Contents
Installation Instructions ArmorBlock 16-Point EtherNet/IP Module, Series A Catalog Numbers 1732E-IB16M12, 1732E-OB16M12, 1732E-16CFGM12, 1732E-16CFGM12W, 1732E-IB16M12W Topic Page Important User Information Environment and Enclosure Prevent Electrostatic Discharge About the EtherNet/IP ArmorBlock 16-Point I/O Modules Catalog Number Explanation Install the Module Set the Network Address Mount the Module Product Dimensions Connect the I/O, Network and Auxiliary Cables to the ArmorBlock Module... -
Page 2: Important User Information
2 ArmorBlock 16-Point EtherNet/IP Module, Series A Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://literature.rockwellautomation.com) describes some important differences between solid state equipment and hard-wired electromechanical devices. -
Page 3: Environment And Enclosure
ArmorBlock 16-Point EtherNet/IP Module, Series A 3 Environment and Enclosure Follow these guidelines for environment and enclosure information for this equipment. This equipment is intended for use in overvoltage Category II applications (as ATTENTION defined in IEC 60664-1), at altitudes up to 2000 m (6562 ft) without derating. This equipment is considered Group 1, Class A industrial equipment according to IEC/CISPR 11. -
Page 4: About The Ethernet/Ip Armorblock 16-Point I/O Modules
4 ArmorBlock 16-Point EtherNet/IP Module, Series A About the EtherNet/IP ArmorBlock 16-Point I/O Modules The EtherNet/IP 1732E ArmorBlock is a 24V DC I/O module that communicates via EtherNet/IP. The sealed IP65, IP67 and IP69K housing of these modules requires no enclosure. Note that environmental requirements other than IP65, IP67 and IP69K may require an additional appropriate enclosure. - Page 5 ArmorBlock 16-Point EtherNet/IP Module, Series A 5 EtherNet/IP ArmorBlock 16-Point I/O Module Functional Earth EtherNet/IP EtherNet/IP EtherNet/IP D-Code M12 D-Code M12 Status LINK Connector Connector LEDs Plastic Metal Housing Housing Connectors Connectors Connectors Node Node Address Address Switches Switches Auxiliary Power X100 Protective...
-
Page 6: Catalog Number Explanation
6 ArmorBlock 16-Point EtherNet/IP Module, Series A Catalog Number Explanation Refer to the table for a description of the catalog numbers. Cat. No. Description Network Auxiliary Connector Power 1732E-IB16M12 EtherNet 24V DC 16 Input 1732E-OB16M12 EtherNet 24V DC 16, 2 A Output Single 4-pin Single D-Code M12 mini... -
Page 7: Mount The Module
ArmorBlock 16-Point EtherNet/IP Module, Series A 7 of the module. Use a small blade screwdriver to rotate the switches. Line up the small notch on the switch with the number setting you wish to use. Valid settings range from 001...254. Network Address Example This example shows the network address... -
Page 8: Product Dimensions
8 ArmorBlock 16-Point EtherNet/IP Module, Series A Product Dimensions Refer to the mounting dimensions illustration to help you mount the modules. 65 mm 43.25 mm (2.56 in.) (1.70 in.) 26.5 mm (1.04 in.) 179 mm (7.05 in.) 169 mm (6.64 in.) 44234 Front View Side View... -
Page 9: Connect The I/O, Network And Auxiliary Cables To The Armorblock Module
ArmorBlock 16-Point EtherNet/IP Module, Series A 9 High Vibration Area Mounting Lock Washer Flat Washer 44235 Connect the I/O, Network and Auxiliary Cables to the ArmorBlock Module The ArmorBlock EtherNet/IP family has 5-pin micro-style connectors. We provide caps to cover the unused connectors on your module. Connect the quick-disconnect cord sets you selected for your module to the appropriate ports. - Page 10 10 ArmorBlock 16-Point EtherNet/IP Module, Series A Network Connectors Refer to the pinout diagrams for the network connectors. D-Code M12 Female Network Connector (View into Connector) Pin 1 M12_Tx+ Pin 2 M12_Rx+ Pin 3 M12_Tx- Pin 4 M12_Rx- Pin 5 Connector Shell Shield GND 44236 Use the 1585D–M4DC–H: Polyamide small body unshielded or the...
- Page 11 ArmorBlock 16-Point EtherNet/IP Module, Series A 11 I/O Connectors Refer to the pinout diagrams for the I/O connectors. Micro-style 5-Pin Female Input Connector (View into Connector) Pin 1 Sensor Source Voltage Pin 2 Input B Pin 3 Return Pin 4 Input A Pin 5 41452...
- Page 12 12 ArmorBlock 16-Point EtherNet/IP Module, Series A • If an I/O point is to be an input, wire the input device as normal and leave the associated output de-energized at all times. I/O Self-configure Circuitry Turn output on Output circuit From PLC Sensor or Output scan list...
- Page 13 ArmorBlock 16-Point EtherNet/IP Module, Series A 13 The module is 24V DC Sink In/Source Out: • 16 Input • 16 Output • 16 Input Or Output points or any mix of 16 (for example, 15 + 1; 8 +8) The output is short circuit protected and output monitoring in “Self-configuring”...
- Page 14 E-stop through the use of special E-stop drop or power T-ports and shorting plugs. Allen-Bradley E-stop T-ports and shorting plugs are red in color for easy identification.
- Page 15 ArmorBlock 16-Point EtherNet/IP Module, Series A 15 Interpret the LED Indicators This module has the following indicators: • Network, Module, and Link status indicators for EtherNet/IP • Auxiliary Power indicator • Individual I/O status indicators for inputs and outputs. Armor WeldBlock Module status indicator Link status indicator EtherNet/IP...
- Page 16 16 ArmorBlock 16-Point EtherNet/IP Module, Series A ArmorBlock Link status indicator Module status indicator Network status indicator I/O status indicators I/O status indicators Auxiliary power status indicator 44231 Network Status Indicator – NET State Status Description Recommended Action Not online The device is not Wait until the module has initialized or the module...
- Page 17 ArmorBlock 16-Point EtherNet/IP Module, Series A 17 State Status Description Recommended Action Flashing Connection time out One or more connections Reset connections to the have timed out. module. Duplicate IP The module has detected Resolve the IP address that its IP address is conflict.
- Page 18 18 ArmorBlock 16-Point EtherNet/IP Module, Series A The Module Status LED indicator remains solid red for a maximum of 30 s IMPORTANT while the module completes its POST (Power-On Self Test). Network Link Status Indicator – LINK State Status Description Recommended Action No network link There is no network link...
-
Page 19: Specifications
ArmorBlock 16-Point EtherNet/IP Module, Series A 19 Specifications ArmorBlock 2-Port EtherNet/IP Module – 1732E-IB16M12x, 1732E-16CFGM12x Attributes Value Number of inputs Input type Sink, 24V DC Voltage, off-state input, max 5V DC Voltage, on-state input, max 30V DC Voltage, on-state input, nom 24V DC Voltage, on-state input, min 11V DC... - Page 20 20 ArmorBlock 16-Point EtherNet/IP Module, Series A ArmorBlock 2-Port EtherNet/IP Module – 1732E-16CFGM12x, 1732E-OB16M12 Current on-state output, max 0.5 A – 1732E-16CFGM12x 2 A – 1732E-OB16M12 Current per module, max 8.0 A (all outputs) 50 μA Leakage current, off-state output, max Surge current per output, max 3.2 A for 10 ms, repeatable every 2 s –...
- Page 21 ArmorBlock 16-Point EtherNet/IP Module, Series A 21 General Specifications Attribute Value Dimensions (HxWxD), approx. 179 x 65 x 43.25 mm (7.05 x 2.56 x 1.70 in.) Weight, approx. 0.34 kg (0.75 lb) Enclosure type rating Meets IP65/66/67/69K (when marked), and NEMA 4X/6P with receptacle dust caps or cable termination.
- Page 22 22 ArmorBlock 16-Point EtherNet/IP Module, Series A Environmental Specifications Attribute Value Vibration IEC60068-2-6 (Test Fc, Operating): 5 g @ 10…500 Hz Shock, operating IEC60068-2-27 (Test Ea, Unpackaged Shock): 30 g Shock, non-operating IEC60068-2-27 (Test Ea, Unpackaged Shock): 50 g Emissions CISPR 11: Group 1, Class A ESD immunity...
- Page 23 ArmorBlock 16-Point EtherNet/IP Module, Series A 23 Certifications Certification (when Value product is marked) c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E322657. European Union 89/336/EEC EMC Directive, compliant with: EN 61326; Meas./Control/Lab., Industrial Requirements EN 61000-6-2;...
- Page 24 RA-DU002, available at http://www.rockwellautomation.com/literature/. Allen-Bradley, Rockwell Automation, ArmorBlock, and TechConnect are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400...