Allen-Bradley 1732E ArmorBlock Series User Information
2-port ethernet/ip modules with quickconnect
Hide thumbs
Also See for 1732E ArmorBlock Series:
- Installation instructions manual (24 pages) ,
- Wiring diagrams (4 pages) ,
- Installation instructions manual (24 pages)
Table of Contents
- 1 Table of Contents
- 2 Important User Information
- 3 Environment and Enclosure
- 4 Preventing Electrostatic Discharge
- 5 Overview
- 6 Catalog Number Explanation
- 7 Install the Module
- 8 Set the Network Address
- 9 Mount the Module
- 10 Product Dimensions
- 11 Connect the I/O, Network and Auxiliary Cables to the Module
- 12 Configure the Module
- 13 Interpret LED Indicators
- 14 Specifications
See also:
Instruction and Installation Manual
Installation Instructions
1732E ArmorBlock 2-Port EtherNet/IP
Modules with QuickConnect
Catalog Numbers 1732E-12X4M12QCDR,
1732E-12X4M12P5QCDR, 1732E-16CFGM12QCR,
1732E-16CFGM12P5QCR, 1732E-16CFGM12QCWR,
1732E-16CFGM12P5QCWR
Table of Contents
Topic
Page
2
3
3
4
5
6
6
7
7
9
14
16
19
Table of Contents
Related Manuals for Allen-Bradley 1732E ArmorBlock Series
Summary of Contents for Allen-Bradley 1732E ArmorBlock Series
-
Page 1: Table Of Contents
Installation Instructions 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect Catalog Numbers 1732E-12X4M12QCDR, 1732E-12X4M12P5QCDR, 1732E-16CFGM12QCR, 1732E-16CFGM12P5QCR, 1732E-16CFGM12QCWR, 1732E-16CFGM12P5QCWR Table of Contents Topic Page Important User Information Environment and Enclosure Preventing Electrostatic Discharge Overview Catalog Number Explanation Install the Module Set the Network Address Mount the Module Product Dimensions Connect the I/O, Network and Auxiliary Cables to the Module... -
Page 2: Important User Information
2 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect Important User Information Solid-state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (Publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://www.rockwellautomation.com/literature/) describes some important differences between solid-state equipment and hard-wired electromechanical devices. -
Page 3: Environment And Enclosure
1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect Environment and Enclosure ATTENTION: This equipment is intended for use in overvoltage Category II applications (as defined in IEC 60664-1), at altitudes up to 2000 m (6562 ft) without derating. This equipment is considered Group 1, Class A industrial equipment according to IEC/CISPR 11. -
Page 4: Overview
If you would like a manual, you can: • download a free electronic version from the internet: http://www.rockwellautomation.com/literature/ • purchase a printed manual by contacting your local Allen-Bradley distributor or Rockwell Automation representative Overview The 1732E-12X4M12QCDR, 1732E-12X4M12P5QCDR, 1732E-16CFGM12QCR, 1732E-16CFGM12P5QCR, 1732E-16CFGM12QCWR, 1732E-16CFGM12P5QCWR ArmorBlock™... -
Page 5: Catalog Number Explanation
1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect Module Identification 1732E-16CFGM12QCWR shown LED status indicators Function earth EtherNet/IP D-code LINK 2 LINK 1 PORT 1 PORT 2 EtherNet/IP D-code M12 connector M12 connector Node address switches M12 style I/O M12 style connectors I/O connectors Mini-style auxiliary... -
Page 6: Install The Module
6 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect Catalog Number Description Network Auxiliary Connector Power 1732E-16CFGM12P5QCR 16 channel 24V DC self-configurable digital Dual D-code Dual 5-pin I/O dual-port Ethernet module with mini QuickConnect 1732E-16CFGM12QCWR 16 channel 24V DC self-configurable digital Dual D-code Dual 4-pin I/O dual-port Ethernet metal WeldBlock... -
Page 7: Mount The Module
1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect Set Network Address Example shows default node address set at 163. 45759 When the switches are set to a valid number, the I/O block’s IP address is 192.168.1.xxx (where xxx represents the number set on the switches). The I/O block’s subnet mask is 255.255.255.0 and the gateway address is set to 0.0.0.0. - Page 8 8 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect Module Dimensions 45 mm 60.4 mm (1.77 in.) (2.38 in.) 28 mm (1.1 in.) LINK 1 LINK 2 PORT 1 PORT 2 200 mm (7.87 in.) 189.6 mm (7.46 in.) AUX POWER 45760 Front view Side view...
-
Page 9: Connect The I/O, Network And Auxiliary Cables To The Module
1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect High Vibration Area Mounting Lock washer Flat washer 44766 Connect the I/O, Network and Auxiliary Cables to the Module The ArmorBlock EtherNet/IP family has 5-pin micro-style connectors. We provide caps to cover the unused connectors on your module. Connect the quick-disconnect cord sets you selected for your module to the appropriate ports. - Page 10 10 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect Micro-style 5-Pin Output Female Connector For 1732E-12X4M12QCDR and 1732E-12X4M12P5QCDR only (View into connector) Pin 1 Not used Pin 2 Output B Pin 3 Return Pin 4 Output A Pin 5 PE 44807 Self-configuring Modules The 1732E-16CFGM12QCR, 1732E-16CFGM12P5QCR, 1732E-16CFGM12QCWR, and 1732E-16CFGM12P5QCWR self-configuring...
- Page 11 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect I/O Self-configure Circuitry 43601 EtherNet/IP Connector D-Code Micro Network Female Connector (View into connector 1) Pin 1 M12_Tx+ Pin 2 M12_Rx+ Pin 3 M12_Tx- Pin 4 M12_Rx- Pin 5 Connector shell shield GND 45793 (View into connector 2) Pin 1 M12_Rx+...
- Page 12 12 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect Enable QuickConnect To enable QuickConnect for the Ethernet ports, use the RSLogix 5000 software Module QuickConnect tab and check the Enable QuickConnect option. For more information on the QuickConnect system set up, refer to Ethernet QuickConnect Application Technique, publication ENET-AT001.
- Page 13 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect Auxiliary Power Connector The 1732E-12X4M12QCDR, 1732E-16CFGM12QCR, and 1732E-16CFGM12QCWR modules use 4-pin auxiliary power connections. Attach the mini-style 4-pin connector to the mini-style 4-pin receptacle as shown below. Mini-style 4-Pin Receptacle Male Input Female Output (View into receptacle) Pin 1 Output power+ Pin 2 Sensor/MDL power+...
-
Page 14: Configure The Module
E-stop through the use of special E-stop drop or power T-ports and shorting plugs. Allen-Bradley E-stop T-ports and shorting plugs are red in color for easy identification. - Page 15 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect Refer to On-Machine Connectivity Catalog, publication M117-CA001, for Rockwell Automation cable and cord set offerings or use the configuration tools available at www.rockwellautomation.com/en/e-tools/. External Repository for Random Data (ERRD) The QuickConnect modules provide onboard nonvolatile memory, of up to 6 Kbytes, for storing block-specific data such as Tool ID and counter value.
-
Page 16: Interpret Led Indicators
16 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect Stop command Service Code 07 (hex) Class ID 6E (hex) Instance ID Attribute ID Interpret LED Indicators This module has the following indicators: • Network, Module, and Link status indicators for EtherNet/IP •... - Page 17 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect 1732E-16CFGM12P5QCR/ 1732E-12X4M12P5QCDR 1732E-16CFGM12P5QCWR Link status Link status Network indicator indicator status indicator LINK 1 LINK 2 LINK 1 LINK 2 PORT 1 PORT 2 PORT 1 PORT 2 Module Network Module status status status indicator indicator...
- Page 18 18 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect Indicator Status for Modules Status Description Network status The device is not initialized or the module does not have an IP address. Flashing green The device has no CIP connections. The device has an IP address, but no CIP connections are established.
-
Page 19: Specifications
1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect Specifications 1732E ArmorBlock 2-Port EtherNet Module Input Attribute Value Number of inputs 12 – 1732E-12x4M12QCDR, 1732E-12x4M12P5QCDR 16 – all other modules Input type Sink, 24V DC Voltage, off-state input, max 5V DC Voltage, on-state input, max 30V DC Voltage, on-state input, nom 24V DC... - Page 20 20 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect 1732E ArmorBlock 2-Port EtherNet Module Output Attribute Value Current per module, max 2.0 A – 1732E-12X4M12QCDR, 1732E-12X4M12P5QCDR 8.0 A – all other modules Leakage current, off-state output, 0.5 mA – 1732E-12X4M12QCDR, 1732E-12X4M12P5QCDR 50 μA –...
- Page 21 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect General Specifications Attribute Value Enclosure type rating Meets IP65/66/67/69K (when marked), and Type 4X Indoor Use Only, with receptacle dust caps or cable termination Wiring category 1 - on signal ports 1 - on power ports 1 - on communications port Onboard memory type Ferroelectric Nonvolatile RAM (FRAM)
- Page 22 22 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect Environmental Specifications Attribute Value Radiated RF immunity IEC 61000-4-3: 10V/m with 1 kHz sine-wave 80% AM from 80…2000 MHz 10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz 10V/m with 200 Hz 50% Pulse 100% AM @ 1890 Mhz 1V/m with 1 kHz sine-wave 80% AM from 2000…2700 MHz EFT/B immunity IEC 61000-4-4:...
- Page 23 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect Notes: Publication 1732E-IN010C-EN-E - June 2013...
- Page 24 RA-DU002, available at http://www.rockwellautomation.com/literature/. Allen-Bradley, Rockwell Automation, ArmorBlock, and TechConnect are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. Publication 1732E-IN010C-EN-E - June 2013 1732E-IN010B-EN-E - December 2011 Copyright ©...