Parameter
PU operation mode (Pr. 79 = 1)
Select the PU operation mode when applying start and speed command by only the key oper-
ation of the operation panel (FR-PU04/FR-PU07). Also select the PU operation mode when
making communication using the PU connector.
When "1" is selected for Pr. 79, the inverter enters the PU operation mode at power on. You can-
not change to the other operation mode.
The digital dial of the operation panel can be used for setting like a volume. (Refer to section
6.21.3).
FR-D700 SC EC
Inverter
Operation panel
Selection of operation mode and operation location
Fig. 6-93:
PU operation mode
I002086E
6 - 177