Allen-Bradley E300 Installation Instructions

Installation Instructions

E300 Expansion Input/Output Modules

(Cat 193-EXP-DIO-42-120; 193-EXP-DIO-42-240; 193-EXP-DIO-42-24D; 193-EXP-AIO-31; 193-EXP-PS-AC; 193-EXP-PS-DC)

WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from contaminants.

Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of practice. In case of malfunction or

damage, no attempts at repair should be made. The product should be returned to the manufacturer for repair. Do not dismantle the product.

Additional Resources:

1) Go to http://www.literature.rockwellautomation.com;

Panel Mount

Hole

DIN Rail Mount

Panel Mount Hole

Digital Expansion Module illustrated

E300

Removable I/O Terminals

Expansion Bus Out

Expansion Bus In

1

193-EXP-PS-_ _

2) Go to Search. Type in publication number: 193-UM015

Color

Off

Blinking Green

Green

Red

Digital Module Number Selector

Number

D1 - D4

D 3 D 4

D 2

T

D 4

D 1

3 T

T

T D

D 1

D 2

D1T - D4T

expansion bus terminating

Note: If the expansion bus does not have an operator station, then the

last expansion module number must be set to terminated.

Click

2

193-EXP-DIO-_ _ _

193-EXP-AIO-_ _

Status LED

Description

No power applied

Module OK with no connection

Module OK and active

Error Detected

Analog Module Number Selector

Description

Number

Module number

A1 - A4

Module number with

A1T - A4T

resistor applied

193-EOS-_ _ _

Description

Module number

Module number with

expansion bus terminating

resistor applied