Allen-Bradley E300 Installation Instructions

Installation Instructions

E300 / E200 Control Module

(Cat 193-EIO-_ _-_ _ _; 193-EIOGP-_ _-_ _ _)

WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from contaminants.

Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of practice. In case of

malfunction or damage, no attempts at repair should be made. The product should be returned to the manufacturer for repair. Do not dismantle the product.

Additional Resources:

1) Go to http://www.literature.rockwellautomation.com;

Features

193-EIO-22-24D

193-EIO-63- _ _ _

193-EIO-22-120 and

193-EIO-43- _ _ _

193-EIO-22-240

Installation

1

193-EIOGP-42- _ _ _

Power / PTC

Terminals

193-EIOGP-22- _ _ _

Relay / Ground

Fault Terminals

2

2) Go to Search. Type in publication number: 193-UM015

Expansion Bus

Connector

Sensing Module

Latch

Communication

Module Latch

Input / Output

Terminals

IMPORTANT - Tightening screws

while the 6 position connector is

plugged in could result in damage

to the connector.

3