Scanner - Toshiba e-STUDIO 2555C Service Manual
Multifunctional digital color systems
Hide thumbs
Also See for e-STUDIO 2555C:
- Troubleshooting manual (136 pages) ,
- Copying manual (228 pages) ,
- Safety information manual (32 pages)
3.8
Scanner
3.8.1
General Description
In the scanning section of this equipment, the surface of an original is irradiated with a direct light and
the reflected light is led through mirrors, a lens and a slit to CCD where optical-to-electrical conversion
is performed, converting the optical image data into an electrical (analog) signal. This analog signal is
changed to a digital signal, which then undertakes various corrective processes necessary for image
formation. After that, arithmetic operation is performed on the digital signal, which is then transmitted to
the data writing section.
In this equipment, a reduction-type CCD for color processing is used. What this CCD differs from black-
and-white CCDs is that its devices are arranged in 3 lines and covered with color filters (Red, Green,
and Blue). These lines are composed with 3-line color devices and black-and-white device with no filter.
[2]
[11]
[1]
[12]
[1] RADF original glass
[2] Carriage-2
[3] Reflector
[4] Exposure lamp
[5] Carriage-1
[6] Original glass
[7] Drive pulley
[8] CCD board
[9] Lens
[10] Automatic original detection sensor
[11] Carriage home position sensor
[12] Platen sensor
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
[3]
[4]
[5]
[6]
[10]
[9]
Fig. 3-18
3 - 41
[7]
[8]
e-STUDIO2555C/3055C/3555C/4555C/5055C
OUTLINE OF THE MACHINE
3
- Quick Links:
- Service Manual
- Table of Contents
Hide quick links:
Troubleshooting
