[EF11] Saddle Stitch Finisher stapling error (front)
MJ-1108
Classification
Finisher jam (Saddle section)
Check item
Finisher
Front saddle stapler drive unit
Saddle controller board
Replace parts
Front saddle stapler drive unit
Saddle controller board
[EF12] Saddle Stitch Finisher stapling error (rear)
MJ-1108
Classification
Finisher jam (Saddle section)
Check item
Finisher
Rear saddle stapler drive unit
Saddle controller board
Replace parts
Rear saddle stapler drive unit
Saddle controller board
[EF13] Saddle stitch unit paper holding home position detection error
MJ-1108
Classification
Finisher jam (Saddle section)
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Front stapling is not correctly done.
•
Is there any paper remaining on the paper transport path
in the Finisher or the equipment, or on the finishing tray?.
•
Is the jam released by taking off the front staple cartridge
from the Finisher and removing the staple sheet slid from
the staple case?
•
Unit check
•
Connector check
•
Harness check
•
Connector check (CN3)
•
Board check
Rear stapling is not correctly done.
•
Is there any paper remaining on the paper transport path
in the Finisher or the equipment, or on the finishing tray?.
•
Is the jam released by taking off the rear staple cartridge
from the Finisher and removing the staple sheet slid from
the staple case?
•
Unit check
•
Connector check
•
Harness check
•
Connector check (CN3)
•
Board check
The paper holder home position cannot be detected.
8 - 115
Error item
Measures
Remarks
Error item
Measures
Remarks
Error item
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
8