Toshiba e-STUDIO 2555C Service Manual page 713
Multifunctional digital color systems
Hide thumbs
Also See for e-STUDIO 2555C:
- Troubleshooting manual (136 pages) ,
- Copying manual (228 pages) ,
- Safety information manual (32 pages)
MJ-1108
Check Item
Buffer tray guide
Buffer tray guide motor
Replacement part
Buffer tray guide motor
Finisher controller PC board
[CB12] Buffer roller drive motor abnormality
Classification
Finisher related service call
MJ-1107
Check Item
Buffer roller
Buffer roller drive motor (M6)
Replacement part
Buffer roller drive motor (M6)
Finisher controller PC board
MJ-1108
Check Item
Buffer roller
Buffer roller drive motor
Replacement part
Buffer roller drive motor
Finisher controller PC board
[CB13] Finisher exit motor (M11) abnormality
MJ-1108
Classification
Finisher related service call
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Raise the buffer roller and open/close the buffer tray guide.
Fix any mechanical problem.
Check if the connector (CN11) on the finisher controller PC
board is disconnected from the buffer tray guide motor (M2) and
the harnesses are open circuited. Correct if so.
Buffer roller drive motor abnormality: The buffer roller drive
motor is not rotating or the buffer roller is not moving normally.
If there is mechanical problem when the buffer roller is rotated,
fix the mechanism.
Check the connectors and harnesses between the buffer roller
drive motor (M6) and the finisher control PC board (CN18).
Rotate the buffer roller.
Fix any mechanical problem.
Check if the connector (CN11) on the finisher controller PC
board is disconnected from the buffer roller drive motor (M4)
and the harnesses are open circuited. Correct if so.
8 - 157
Measure
Measure
Contents
Measure
Measure
Measure
Measure
Error item
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
8
- Quick Links:
- Service Manual
- Table of Contents
Hide quick links:
Troubleshooting
