Toshiba e-STUDIO 2555C Service Manual page 566
Multifunctional digital color systems
Hide thumbs
Also See for e-STUDIO 2555C:
- Troubleshooting manual (136 pages) ,
- Copying manual (228 pages) ,
- Safety information manual (32 pages)
Error code
Classification
EA23
Finisher jam
(Finisher section)
EA24
EA25
EA26
EA27
EA28
EA29
EA2A
EA2B
EA2C
EA2D
EA2E
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
Contents
Paper transport jam (transport sensor): Paper
being transported on the Finisher transport
path is stopped at the transport sensor at 27.56
inches or longer. [MJ-1107/1108]
Paper transport jam (between entrance and
transport sensors): The leading edge of paper
which has passed the entrance sensor on the
Finisher transport path does not reach the
transport sensor. [MJ-1107/1108
Paper transport jam in the Finisher (after
paper stack exit): Paper is detected in the
finishing tray sensor after the paper stack has
exited from the finishing tray. [MJ-1036]
Paper transport jam (after paper stack exit):
The finishing tray paper detection sensor
detects paper after a stack of paper exits from
the finishing tray. [MJ-1107/1108]
Paper transport jam (stop command request):
A command to stop equipment operation is
received while paper is being transported in the
Finisher. [MJ-1107/1108]
Paper transport jam (paper not inserted): The
equipment detects a paper-not-inserted jam
but the entrance sensor is turned ON before
the equipment is stopped. [MJ-1107/1108]
Paper transport jam (paper holder plate
operation delay): An attempt to start the arm
assisting operation for dropping paper on the
finishing tray is made, but the previous arm
assisting operation has not yet been finished.
[MJ-1107/1108]
Paper transport jam (stack transport delay):
The buffer tray is extended to drop a stack of
paper on the finishing tray but the previous
stack has not yet exited. [MJ-1107/1108]
Paper transport jam in the Finisher (Entrance
path - middle path sensor) [MJ-1036]
Paper transport jam in the Finisher (Middle
path sensor) [MJ-1036]
Paper transport jam in the Finisher (Entrance
path - sub-path sensor) [MJ-1036]
Paper transport jam in the Finisher (Sub-path
sensor) [MJ-1036]
Paper transport remaining jam in the Finisher
(sub-path sensor): Paper is detected in the
sub-path sensor when the power is turned ON
or the cover is closed. [MJ-1036]
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
8 - 10
Troubleshooting
P. 8-85
P. 8-85
P. 8-88
P. 8-85
P. 8-85
P. 8-85
P. 8-85
P. 8-85
P. 8-88
P. 8-88
P. 8-89
P. 8-90
P. 8-90
- Quick Links:
- Service Manual
- Table of Contents
Hide quick links:
Troubleshooting
