Toshiba e-STUDIO 2555C Service Manual page 449
Multifunctional digital color systems
Hide thumbs
Also See for e-STUDIO 2555C:
- Troubleshooting manual (136 pages) ,
- Copying manual (228 pages) ,
- Safety information manual (32 pages)
[G] Bottom margin
While pressing [0] and [5] simultaneously, turn the power ON. → (Adjustment Mode)
(1)
(2)
Open platen cover or RADF.
Press the [FAX] → [START] to make a copy at the mode of A3/LD, 100%, Full color, Text/Photo
(3)
and 2nd drawer.
(4)
Measure the blank area G at the trailing edge of the copied image.
(5)
Check if the blank area G is within the range.
Function
Copy
(6)
If not, use the following procedure to change values and repeat the steps 3. to 5. above.
(Adjustment Mode) → (Key in the code [4053]) → [START]
→ (Key in value (acceptable values: 0 to 255))
→ [OK] or [INTERRUPT] (stored in memory)
→ ("100% A" is displayed.)
* The larger the adjustment value is, the wider the blank area at the trailing edge becomes
(approx. 0.04 mm/step).
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Black
Color
3±2.0 mm
3±2.0 mm
Feeding direction
G
Fig.6-18
6 - 23
e-STUDIO2555C/3055C/3555C/4555C/5055C
SETTING / ADJUSTMENT
6
- Quick Links:
- Service Manual
- Table of Contents
Hide quick links:
Troubleshooting
