(3)
Disconnect 1 paper width detection PC
board connector [1] and remove the paper
width detection PC board [2].
Notes:
When removing the paper width detection
PC board cover, be careful not to drop the
gear web washers or washers.
4.5.5
Bypass feed sensor (S16)
(1)
Remove the transport unit.
P. 4-194 "4.11.3 Transport unit"
(2)
Press the flange [1] inside and remove the
bypass feed roller [2].
(3)
Remove the clip [1], shaft [2], and collar [3].
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 42
Fig. 4-116
Fig. 4-117
Fig. 4-118