Dell S4820T Configuration Manual page 593
Hide thumbs
Also See for S4820T:
- Manual (60 pages) ,
- Installation manual (59 pages) ,
- Configuration manual (1128 pages)
Table of Contents
Type
127
127
127
IEEE 802.3 Organizationally
Specific TLVs
127
127
127
127
Link Layer Discovery Protocol (LLDP)
TLV
Port-VLAN ID
Port and Protocol VLAN ID
Protocol Identity
MAC/PHY Configuration/Status
Power via MDI
Link Aggregation
Maximum Frame Size
Description
On Dell Networking systems,
indicates the untagged VLAN to
which a port belongs.
On Dell Networking systems,
indicates the tagged VLAN to
which a port belongs (and the
untagged VLAN to which a port
belongs if the port is in Hybrid
mode).
Indicates the protocols that the
port can process. Dell
Networking OS does not
currently support this TLV.
Indicates the capability and
current setting of the duplex
status and bit rate, and whether
the current settings are the result
of auto-negotiation. This TLV is
not available in the Dell
Networking OS implementation
of LLDP, but is available and
mandatory (non-configurable) in
the LLDP-MED implementation.
Dell Networking supports the
LLDP-MED protocol, which
recommends that Power via MDI
TLV be not implemented, and
therefore Dell Networking
implements Extended Power via
MDI TLV only.
Indicates whether the link is
capable of being aggregated,
whether it is currently in a LAG,
and the port identification of the
LAG. Dell Networking OS does
not currently support this TLV.
Indicates the maximum frame
size capability of the MAC and
PHY.
593
Hide quick links:
Table of Contents
Troubleshooting
