Table of Contents
SCOPE OF MANUAL
CHAPTER I
INTRODUCTION
The DDP-416 Instruction Manual consists of three volumes the contents of which are
as follows:
1) Volume I, theory of operation and maintenance information for the computer
central processor lugic, computer memory and standard input/output (I/O) equipment
interface.
2) Volume II, instruction analysis with supporting flow charts and a function
index listing.
3) Volume III, computer central processor logic and power distribution diagrams,
memory logic diagrams and mechanical coding drawings.
APPLICABLE DOCUMENTS
All manuals provided as standard documentation with each DDP-416 computer are
listed in Table 1-1.
The documentation package provided with each DDP-416 system includes all the
documents listed in Table 1-1.
Customers may obtain additional copies of any manual by
contacting their local Honeywell Inc. Computer Control Division representative or by
writing directly to:
Honeywell Inc.
Computer Control Division
Old Connecticut Path
Framingham, Massachusetts
01701
Table 1-1.
Standard DDP-416 Documentation
Title
Hardware Manuals
Instruction Manual for DDP-416 General Purpose Computer
Volume I, Theory of Operation and Maintenance
Volume II, Instruction Analysis and Timing/Flow Diagrams
Volume III, Drawings
Installation Manual for DDP-416 General Purpose Computer
Interface Manual for DDP-416 General Purpose Computer
-
Document No.
130071653'
130071654
/ /
Cr)
M
130071655 v
J
Y.#'L/
130071733
130071732
1-1
1
Table of Contents
