Table of Contents
2-3-3 Rotation of Standard Head Scanner
For the standard head models (LP-RH300S / LP-RH200S / LP-RH100S / LP-RH301S / LP-RH101S / LP-RH305S), the
angle of the head scanner unit can be set freely.
This function is specific to the standard head model. It is not equipped in the tower head model.
Rotation Method
• The head scanner can be rotated up to 350 degrees by loosening the hexagon socket head cap screw (M4). After
rotating the scanner unit, fix it tightly.
• The tightening torque shall be 1.5N·m.
WARNING
Center of Rotation
Unit: mm
Approx. 60°
End Standard
for Base
14.2
48
Loosen
Approx. 200 degree
• Never use the laser marker with the setscrew for scanner angle loosened.
Failure to do so could rotate the head during the operation and cause laser
emission to the dangerous direction.
Approx. 20°
51.2
28
130
115.5
8.3
158.4
29.2
129.2
M4 Hexagon Wrench
Approx. 150 degree
Center of
Rotation Axis
31.8
8.3
31.8
ME-LPRH-SM-3
129.2
29.2
107.2
Table of Contents
Troubleshooting
