Backplane - Lenovo ThinkSystem SR665 V3 User Manual
Hide thumbs
Also See for ThinkSystem SR665 V3:
- System configuration manual (80 pages) ,
- User manual (256 pages)
Table of Contents
Cable routing when one processor installed
Figure 512. SAS/SATA cable routing
From
Backplane 1: SAS 0,
1
SAS 1
12 x 3.5-inch SAS/SATA expander backplane
This section provides cable routing information for the server model with the front 12 x 3.5-inch SAS/SATA
expander backplane.
To connect power cables for the front backplane(s), refer to
drive bays" on page
437.
To connect signal cables for the front backplane(s), refer to the following cable routing scenarios depending
on your server configuration.
•
"Front backplane: 12 x 3.5" SAS/SATA" on page 459
•
"Front + rear backplanes: 12 x 3.5" SAS/SATA + 2 x 3.5"/4 x 3.5" SAS/SATA" on page 460
•
"Front + rear backplanes: 12 x 3.5" SAS/SATA + 4 x 2.5" AnyBay" on page 462
•
"Front + middle + rear backplanes: 12 x 3.5" SAS/SATA + 4 x 3.5" SAS/SATA+ 4 x 3.5" SAS/SATA" on
page 463
Front backplane: 12 x 3.5" SAS/SATA
This topic provides cable routing information for the front 12 x 3.5-inch SAS/SATA expander backplane.
To
8i adapter
1
• Gen 4: C0
• Gen 3: C0C1
Figure 513. NVMe cable routing
From
Backplane 1: NVMe 8-9
1
Backplane 1: NVMe 10-
2
11
"Backplanes: server models with 3.5-inch front
Chapter 6
To
Onboard: PCIe 2
1
Onboard: PCIe 1
2
.
Internal cable routing
459
Table of Contents
