Middle/Rear backplane cable routing
Figure 335. Middle backplane cable routing
From
1 1
• Backplane 5: SAS
• Backplane 6: SAS
2
• Backplane 5: PWR
• Backplane 6: PWR
Two 8 x AnyBay backplanes
This section provides cable routing information for the server model with two 8 x 2.5-inch AnyBay front
backplanes.
To connect power cables for the front backplane(s), refer to
drive bays" on page
312.
To connect signal cables for the front backplane(s), refer to the following cable routing scenarios depending
on your server configuration.
•
"Trimode 8i RAID adapter" on page 340
•
"Trimode 16i RAID adapter" on page 340
To
16i adapter
1
• Gen 4: C1
• Gen 3: C2C3
2
• Onboard: rear
backplane power
• Onboard: rear
backplane sideband
• Riser 1: PWR
Figure 336. Rear backplane cable routing
From
Backplane 4: SAS
1
Backplane 4: PWR
2
"Backplanes: server models with 2.5-inch front
Chapter 6
To
16i adapter
1
• Gen 4: C0
• Gen 3: C0C1
Onboard: 7mm power
2
connector
.
Internal cable routing
339