Install A Serial Port Module - Lenovo ThinkSystem SR665 V3 User Manual
Hide thumbs
Also See for ThinkSystem SR665 V3:
- System configuration manual (80 pages) ,
- User manual (256 pages)
Table of Contents
Figure 242. Disassembling the serial port module
After you finish
1. Install a new serial port module, a PCIe adapter, or a filler to cover the place. See
module" on page 274
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a serial port module
Follow instructions in this section to install a serial port module.
About this task
Attention:
• Read
"Installation Guidelines" on page 47
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure
A video of this procedure is available at YouTube:
DR4X1YAcp9wFKhwj_tLQ5Y
Procedure
Note: The riser bracket in below illustrations might look different from your riser bracket. The installation
procedure is the same.
Step 1.
Touch the static-protective package that contains the new part to any unpainted surface on the
outside of the server. Then, take the new part out of the package and place it on a static-protective
surface.
Step 2.
(Optional) Use a 5 mm wrench to install the serial port cable into the bracket.
ThinkSystem SR665 V3 User Guide
274
or
"Install a rear riser assembly" on page
and
"Safety inspection checklist" on page 48
62.
.
242.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
"Install a serial port
to ensure that you
Table of Contents
