Serial Port Module Replacement; Remove A Serial Port Module - Lenovo ThinkSystem SR665 V3 User Manual
Hide thumbs
Also See for ThinkSystem SR665 V3:
- System configuration manual (80 pages) ,
- User manual (256 pages)
Table of Contents
Figure 238. Installing the system fan cage
Step 1.
Align the system fan cage with the mounting guides on both sides of chassis, and lower it into the
chassis.
Step 2.
Rotate the fan cage levers down until the fan cage clicks into place.
Note: If there are system fans installed in the system fan cage, ensure that the system fans are
correctly connected to the system fan connectors on the system board assembly.
After you finish
1. If you have removed the system fans, reinstall them. See
2. Complete the parts replacement. See
Demo video
Watch the procedure on YouTube
Serial port module replacement
Follow instructions in this section to remove and install a serial port module.
•
"Remove a serial port module" on page 271
•
"Install a serial port module" on page 274
Remove a serial port module
Follow instructions in this section to remove a serial port module.
About this task
Attention:
"Install a system fan" on page
"Complete the parts replacement" on page
Chapter 5
266.
279.
.
Hardware replacement procedures
271
Table of Contents
