From
Backplane 5: NVMe 0-1, 2-3
1
Backplane 6: NVMe 0-1, 2-3
2
3
• Backplane 5: PWR
• Backplane 6: PWR
One 8 x AnyBay and two 8 x NVMe backplanes
This section provides cable routing information for the server model with one 8 x 2.5-inch AnyBay and two 8
x 2.5-inch NVMe front backplanes.
To connect power cables for the front backplane(s), refer to
drive bays" on page
312.
To connect signal cables for the front backplane(s), refer to the following cable routing scenarios depending
on your server configuration.
•
"8i RAID/HBA adapter + One retimer card" on page 408
•
"8i RAID/HBA adapter + Three retimer cards" on page 411
8i RAID/HBA adapter + One retimer card
The following shows the cable connection for the front (8 x 2.5-inch AnyBay + 16 x 2.5-inch NVMe)
configuration with one 8i RAID/HBA adapter and one retimer card.
Connections between connectors:
ThinkSystem SR665 V3 User Guide
408
To
Retimer card: C0, C1
1
Retimer card: C0, C1
2
3
• Onboard: rear backplane power
• Onboard: rear backplane sideband
• Riser 1: PWR
↔
↔
↔
,
,
, ...
1
1
2
2
3
3
"Backplanes: server models with 2.5-inch front
↔
n
n