Table of Contents
284 Parameters
No.
Name/Value
Warning
Fault
Fault if running
32.17
Supervision 2
signal
32.18
Supervision 2 filter
time
0.000 ... 30.000 s
32.19
Supervision 2 low
-21474830.00 ...
21474830.00
32.20
Supervision 2 high
-21474830.00 ...
21474830.00
32.25
Supervision 3
function
Disabled
Low
High
Abs low
Abs high
Both
Abs both
32.26
Supervision 3
action
No action
Warning
Fault
Fault if running
32.27
Supervision 3
signal
32.28
Supervision 3 filter
time
0.000 ... 30.000 s
Description
A warning
(A8B1 Signal supervision
The drive trips on
80B1 Signal supervision
If running, the drive trips on
Selects the signal to be monitored by signal supervision
function 2.
For the available selections, see parameter
1
signal.
Defines a filter time constant for the signal monitored by signal
supervision 2.
Signal filter time.
Defines the lower limit for signal supervision 2.
Low limit.
Defines the upper limit for signal supervision 2.
Upper limit.
Selects the mode of signal supervision function 3. Determines
how the monitored signal (see parameter 32.27) is compared
to its lower and upper limits
The action to be taken when the condition is fulfilled is
selected by 32.26.
Signal supervision 3 not in use.
Action is taken whenever the signal falls below its lower limit.
Action is taken whenever the signal rises above its upper limit. 2
Action is taken whenever the absolute value of the signal falls
below its (absolute) lower limit.
Action is taken whenever the absolute value of the signal rises
above its (absolute) upper limit.
Action is taken whenever the signal falls below its low limit or
rises above its high limit.
Action is taken whenever the absolute value of the signal falls
below its (absolute) low limit or rises above its (absolute) high
limit.
Selects the action the drive takes when the value monitored
by signal supervision 3 exceeds its limits.
Note: This parameter does not affect the status indicated by
32.01 Supervision
status.
No action taken.
A warning
(A8B2 Signal supervision
The drive trips on
80B2 Signal supervision
If running, the drive trips on
Selects the signal to be monitored by signal supervision
function 3.
For the available selections, see parameter
1
signal.
Defines a filter time constant for the signal monitored by signal
supervision 3.
Signal filter time.
2) is generated.
2.
80B1 Signal supervision
32.07 Supervision
(32.29
and
32.30
respectively).
3) is generated.
3.
80B2 Signal supervision
32.07 Supervision
Def/FbEq16
1
2
2.
3
Zero
0.000 s
1000 = 1 s
0.00
-
0.00
-
Disabled
0
1
3
4
5
6
No action
0
1
2
3.
3
Zero
0.000 s
1000 = 1 s
Chapters
Table of Contents
