Light Intensity Hazard Distance - Christie CP2415-Xe Installation And Setup Manual

This projector has been classified as Risk Group 3 as per the IEC 62471-5:2015 standard due to

possible hazardous optical and thermal radiation being emitted.

Warning! If not avoided, the following could result in serious injury.

•

PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be

permitted.

•

PERMANENT/TEMPORARY BLINDNESS HAZARD! Operators must control access to the beam

within the hazard distance or install the product at the height that prevents exposure of

spectators' eyes within the hazard distance. The hazard zone must be no lower than 2.5 meters

(US installations) or 2.0 meters (global installations) above any surface upon which any persons

are permitted to stand and the horizontal clearance to the hazard zone must be a minimum 1.0

meters.

•

EXTREME BRIGHTNESS! Do not place reflective objects in the product light path.

The following show the zones for ocular and skin hazard distances.

•

A—Hazard zone. The region of space where the projection light from the projector is above

emission limits for Risk Group 2. The light intensity may cause eye damage after a momentary

or brief exposure (before a person can avert his or her eyes away from the light source). The

light may cause skin burns to occur.

•

B—Hazard distance. Operators must control access to the beam within the hazard distance or

install the product preventing potential exposure of the spectators' eyes from being in the

hazard distance.

•

C—No access zone. Horizontal clearance of the no access zone must be a minimum of 1.0

meters.

•

D—Vertical distance to hazard zone. The hazard zone must be no lower than 2.5 meters (US

installations) or 2.0 meters (global installations) above any surface upon which any persons

are permitted to stand.

If the vertical distance to hazard zone requirement (Zone D) is satisfied, the horizontal

clearance distance (Zone C) is not needed.

•

E—Represents the top view of the projector.

CP2415-Xe Installation and Setup Guide

020-103584-02 Rev. 1 (09-2022)

Copyright

©

2022 Christie Digital Systems USA, Inc. All rights reserved.

If printed, please recycle this document after use.

Introduction

8