1. Manuals
  2. Brands
  3. Christie Manuals
  4. Projector
  5. Cinema 2K-RBe
  6. Installation and setup manual

Christie Cinema 2K-RBe Installation And Setup Manual

Hide thumbs
Table of Contents

Quick Links

Installation and Setup Guide
020-103907-01
Cinema 2K-RBe
CP2406-RBe, CP2409-RBe, and CP2411-RBe
Table of Contents
loading

Related Manuals for Christie Cinema 2K-RBe

Summary of Contents for Christie Cinema 2K-RBe

  • Page 1 Installation and Setup Guide 020-103907-01 Cinema 2K-RBe CP2406-RBe, CP2409-RBe, and CP2411-RBe...
  • Page 2 Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for a particular purpose.

  • Page 3: Table Of Contents

    Turning on or off the light source......... 26 Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev.
  • Page 4 Electronic Color Correction (ECC).........56 Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev.
  • Page 5 Environmental........... . 60 Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev.

  • Page 6: Introduction

    Introduction This manual is intended for professionally trained operators of Christie high-brightness Cinema 2K-RBe projection systems. Only trained Christie qualified technicians who are knowledgeable about the hazards associated with high-voltage, laser safety, and the high temperatures generated by the projector are authorized to assemble and install the projector.

  • Page 7: General Safety Precautions

    Caution! If not avoided, the following could result in minor or moderate injury. • Only Christie qualified technicians are permitted to open product enclosures. Laser safety precautions Read all safety and warning guidelines before operating the projector laser.

  • Page 8: Ac/Power Precautions

    • SHOCK HAZARD! A dedicated, protected ground or earth wire must be installed on the product by Christie qualified technicians or electricians before it can be connected to power. • SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning, removing components, or opening any enclosure.
  • Page 9 E—Represents the top view of the projector. • F—Represents the side view of the projector. The following table lists the hazard distance for the Christie projector lens with the zoom adjusted to its most hazardous position. Projection lens Part number...
  • Page 10 Introduction Hazard distance Throw ratio High brightness lenses Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 11 CP2409-RBe hazard distance graph Hazard distance Throw ratio High brightness lenses Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 12 Distance between two adjacent projector lenses in the stack 1. Determine the hazard distance (HD) of a single projector with a given lens and the distance (h) between the adjacent lenses. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...

  • Page 13: Product Labels

    Learn about the labels that may be used on the product. Labels on your product may be yellow or black and white. General hazards Hazard warnings also apply to accessories once they are installed in a Christie product connected to power. Fire and Shock Hazard To prevent fire or shock hazards, do not expose this product to rain or moisture.
  • Page 14 Notice. If not avoided, the following could result in property damage. General hazard. Not for household use. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...

  • Page 15: Mandatory Actions

    The extreme high brightness can cause permanent eye damage. Class 1 Laser Product - Risk Group 3 according to IEC 60825-1:2014 and IEC 62471-5:2015 Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...

  • Page 16: Additional Hazard Labels

    Compact form to fit in existing projection booths List of components Verify all components were received with the projector. • High security key Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 17: Accessories

    Introduction Accessories Learn about accessories that are available for the Cinema 2K-RBe projector. Projection lenses Projection lens Part number 0.83-1.2:1 DLP Cine zoom 108-498102-XX 1.2-1.72:1 DLP Cine zoom 108-494108-XX 1.33-2.1:1 DLP Cine zoom 108-495109-XX 1.62-2.7:1 DLP Cine zoom 108-496100-XX 2.09-3.9:1 DLP Cine zoom...

  • Page 18: Technical Support

    [email protected] • +1-877-334-4267 • Christie Professional Services: +1-800-550-3061 or [email protected] Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 19: Installing And Setting Up

    Installing and setting up Learn how to position and install the projector. Site requirements To safely install and operate the Cinema 2K-RBe projector, the installation location must meet these minimum requirements. Physical operating environment • Ambient temperature (operating) 10 to 35°C (50 to 95°F) up to 1000 m (3280.8 feet) •...

  • Page 20: Power Specifications

    1800 W maximum 400 W maximum Rated current 9 A, 1Φ 4 A, 1Φ Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 21: Projector Components

    Make sure the installation area is ready for the components. 1. Clear the installation area. 2. Post laser hazard warning signs at all entry doors. 3. Place each component near its installation location. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...

  • Page 22: Lifting And Positioning The Projector

    Do not install or operate the projector in an inverted position. If your site has any installation requirements other than a typical theater projection booth, contact Christie for assistance. Before lifting and positioning the projector, refer to the light intensity hazard distances.

  • Page 23: Installing The Lens

    2. Remove the lens surround. 3. Turn the lens clamp on the front of the projector to the open position. The lens clamp can be turned manually but Christie recommends using a hex key to turn it to the correct position.
  • Page 24 7. Insert and tighten the two lens mount hex screws shipped separately with the projector. 8. Lock the lens assembly in place. The lens clamp can be turned manually but Christie recommends using a hex key to turn it to the correct position.

  • Page 25: Installing The Touch Panel (Optional)

    4. Connect the touch screen monitor communication harness to the USB-C port on the Video Input panel. Projector power modes The Cinema 2K-RBe projectors track laser operation hours for the laser optical subsystem (LOS). The projector operates with the following power modes: Mode...

  • Page 26: Turning On Or Off The Projector

    If turning on the light source when the projector power is off, power is turned on automatically. Allow the projector to cool down for three minutes after turning it off. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...

  • Page 27: Selecting Integrated Media Block (Imb) Preferences

    At the Arming stage, enter the Marriage password. 4. Select Finish. Disposing of the product packaging Once the product has been installed and set up, Christie recommends reusing or recycling the product packaging according to your local regulations. Completing the installation checklist Complete the provided installation checklist (P/N: 020-103137-XX) and return it to Christie.

  • Page 28: Video Input Panel

    Connects the projector to external automation or automation devices. Marriage button Used during the Integrated Media Block (IMB) marriage setup process. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 29: Hdmi Video Source

    4096x2160 24, 25, 30 Y'C' /RGB/4:4:4 8/10/12 bpc Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 30 Y'C' /RGB/ 8/10/12 bpc Frame-packing 4:4:4 Y'C' /4:2:2 Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 31: Integrated Media Block (Imb) Video Source

    /4:2:2 8/10/12 bpc Integrated Media Block (IMB) video source Christie Series 4 projectors support both the legacy Series 2 (S2) and newer Series 4 (S4) HDRConnect ™ IMB interfaces to send digital video data from an IMB to the projector.
  • Page 32 12-bits SMPTE 428-11-2013 4096x2160 30.0 X’Y’Z’ (4:4:4) 12-bits Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 33: Series 4 Integrated Media Block (Imb) Video Formats

    8-bits 525 4SIF 704x480 120.0 120.0 23.0 8-bits Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 34 Am1:2016 SMPTE 2048-1-2011 4096x2160 X’Y’Z’ (4:4:4) 12-bits Am1:2016 Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 35: Hdmi Video Source Connection From An Integrated Media Block (Imb)

    Media Block (IMB) devices. The input configurations supported are determined by the IMB device directly. Contact Christie Technical Support to learn which IMB devices provide HDMI source selection from the projector user interface. HDMI input selection directly from the IMB may also be possible using the IMB user interface. The input configurations supported are determined by the IMB make and model.

  • Page 36: Sdi Video Source Connection From An Integrated Media Block (Imb)

    The projector can accept digital video data from SDI sources connected to applicable Integrated Media Block (IMB) devices. The input configurations supported are determined by the IMB device directly. Contact Christie Technical Support to learn which IMB devices provide SDI source selection from the projector user interface.
  • Page 37 GPI3_NEG Serial Communications — Right-side GPO pins The 16 pins are available for output. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 38 GPO5_SRC GPO5_RTN GPO6_SRC GPO6_RTN GPO7_SRC GPO7_RTN Health_SRC Health_RTN Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 39 The 5 VDC (pin T1 and pin T2 in the left-hand GPI) is intended for use to supply the inputs. GPIO outputs Outputs are solid state relays with a 1 A AC/DC rating at up to 48 V. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...

  • Page 40: Managing The Light Source

    Engage the 3D system in the light path by enabling 3D Sync when selecting the test pattern. b) Mount a 3D glass or filter on the color meter to measure the brightness. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...

  • Page 41: Modifying An Existing Laser File

    1. In the left navigation menu, select Laser Settings > Laser Power/LiteLOC Setup. 2. In the Laser File list, select the file to delete. 3. Select Delete 4. To confirm the deletion, select Delete. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...

  • Page 42: Liteloc ™ Sensor-To-Screen Calibration

    Re-doing this calibration is required if the following is replaced: • Color sensor board Christie recommends re-doing this calibration if any of the following are replaced: • Light engine •...
  • Page 43 When the countdown ends, take x, y, and fL measurements using the spectroradiometer. Christie recommends taking meter readings from the center of the screen to obtain accurate screen measurements. c) Under Measured Values, using the numeric keypad record the associated spectroradiometer values for x, y, and fL.

  • Page 44: Recalibrating An Existing Calibration File

    Spectroradiometer measurements can be captured in any order but all three x, y, and fL measurements must be entered before moving onto the next capture. You can recapture a Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...

  • Page 45: Editing The Existing Calibration File Parameters

    Step 3 of the Calibration wizard opens. 6. Verify and complete the calibration. a) Select a white point to measure by selecting either the DCI, D65, or Custom white point buttons. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...

  • Page 46: Adding A Calibration File To The Channel Setup

    2. Select the channel you want to add the calibration file to. 3. From either the 2D Sensor-to-Screen Calibration File or 3D Sensor-to-Screen Calibration File list, select the calibration file. 4. Select Save. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...

  • Page 47: Adjusting The Image

    Learn how to adjust image geometry so it displays correctly. Calibrating the Intelligent Lens System On Cinema 2K-RBe projectors, the Intelligent Lens System (ILS) is activated by default. Use the Auto Calibrate feature of the ILS to find and compensate for motor backlash, and to determine the movement range for the currently installed lens.

  • Page 48: Installing The Extension Feet

    9. Prior to putting weight on projector, lock the foot nut up against the extension big nut. Torque to 30in-lbs. 10. Lock the small extension nut up against the bottom of the projector. Torque to 30in-lbs. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...

  • Page 49: Correcting Keystone Effect

    2. If the keystone effect is severe, unevenly adjust the feet to compensate for projector tilt. Christie recommends using the lens offset to align the center of the image to the center of the screen before correcting the keystone effect.

  • Page 50: Displaying A Test Pattern

    For 3D test patterns, the available frame rates are 48 and 60 FPS. The default value is 48 FPS. Changing the frame rate of the display can assist with color measurement when working with corrected colors. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...

  • Page 51: Aligning The Boresight

    • If boresight is required, continue to step 4. The adjustment screws (A) on the lens mount affects the corresponding cross-hairs on the test pattern. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...
  • Page 52 5. To fine tune the focus of cross-hair pattern I, adjust the appropriate adjustment screw (A) until the cross-hair image is in focus with minimal flare. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...
  • Page 53 This may require adjusting both setscrews and adjustment screws. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...

  • Page 54: Mechanically Adjusting Digital Micromirror Device (Dmd) Convergence

    2. In the right toolbar, select Test Patterns. 3. Select the RGB-2K-Convergence test pattern and display it full screen. 4. Access the screws on the light engine. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...
  • Page 55 — — 8. Insert and remove a second driver to adjust the horizontal/twist adjustment screw or the vertical adjustment screw. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 56: Electronic Color Correction (Ecc)

    (1/64 pixel per step) when using the directional pad. Sprites can be moved a maximum of 20 pixels. 8. Choose a corner by selecting the circle at a corner of the dashed rectangle. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...
  • Page 57 Reset. 14. To save the current ECC settings, when the convergence is complete, select Save beside the ILS file named at the top of the panel. Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...

  • Page 58: Correcting On-Screen Color

    Technology (PCT) file to achieve optimal color and brightness uniformity. For more information on managing color settings, see the CineLife+ 2.0 User Guide (P/N: 020-103845-XX). Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright ©...

  • Page 59: Regulatory

    Flicker input current ≤ 16 A per phase and not subject to conditional connection Immunity • CISPR 35/EN 55035 Electromagnetic compatibility of multimedia equipment - Immunity requirements Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 60: California Law On Security

    • EU Directive (94/62/EC) on packaging and packaging waste • China packaging recycling mark standard (GB18455-2010) Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe 020-103907-01 Rev. 1 (03-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved.

This manual is also suitable for:

Cp2406-rbeCp2409-rbeCp2411-rbe

Table of Contents