Christie CP2415-Xe Installation And Setup Manual page 22

5. Loosen the cathode screw (D in the image below) with the 5 mm hex key attached to the lamp

door.

A

Anode terminal

B

Anode wire

C

Reflector

D

Cathode screw

E

Cathode nut

F

Cathode clamp

6. Remove the anode screw from the anode terminal (A in the image in image in step 5).

7. Install the lamp:

CP2415-Xe Installation and Setup Guide

020-103584-02 Rev. 1 (09-2022)

Copyright

©

2022 Christie Digital Systems USA, Inc. All rights reserved.

If printed, please recycle this document after use.

Installation and setup

22