Installation And Setup; Site Requirements; Power Specifications - Christie CP2415-Xe Installation And Setup Manual
Hide thumbs
Also See for CP2415-Xe:
- Technical reference (32 pages) ,
- Installation and setup manual (19 pages) ,
- User manual (104 pages)
Table of Contents
Installation and setup
Learn how to install, connect, and optimize the projector.
This section provides detailed information on projector setup.
Site requirements
To safely install and operate the CP2415-Xe projectors, the installation location must meet these
minimum requirements.
Physical operating environment
•
Ambient temperature (operating) 10 to 35°C (50 to 95°F)
•
Humidity (non-condensing) 10% to 80%
•
Operating altitude 0 to 3000 meters (0 to 9843 feet) at 10 to 25°C (50 to 77°F)
External exhaust ducting
The installation site must provide sufficient external exhaust airflow to make sure adequate cooling of
the Xenon arc lamp.
•
At 25°C (77°F) ambient or less and below 915 meters (3,000 feet), a minimum of 450 CFM is
required.
•
Above 25°C (77°F) or above 915 meters (3,000 feet), a minimum of 600 CFM is required.
Power specifications
Learn the power requirements for the projector.
Main input
Item
Voltage range
Maximum current
Line frequency
UPS input
Item
Voltage range
Maximum current
CP2415-Xe Installation and Setup Guide
020-103584-02 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
200-240 VAC
16 A
50/60 Hz
Description
100-240 VAC
4 A
16
Table of Contents
