Table of Contents
GE M
S
EDICAL
YSTEMS
D
FC091194, R
IRECTION
5-4-7
BEP-2 Description
NOTE:
Specifications mentioned about the Back End Processor (BEP-2) is minimum requirements.
The actual hardware could exceed these specifications as technology advances.
The EMC Enclosure House
•
A Power Supply with UPS battery backup,
•
An Intel Motherboard with 768 Mbytes of ram and a single 2.0 GHz P4 processor w/ 400 MHz FSB.
•
Six (6) USB Ports
•
One (1) Serial Port (COM1 used for modem connection)
•
USB to Serial adapter cable (USB #3 to II/O B7) for External I/O serial output
•
AGP Video output from the motherboard (AGP Card Slot empty)
•
LAN output from the motherboard (PCI Card Slot 6 empty)
Use of
1.) Blank
2.) Optional SCSI Card for MO Drive
3.) Blank
4.) PC2IP Card - GE designed. PCI Bus interface to the Front End Processor
5.) Blank
•
Analog output complies with the SVGA specification.
•
Resolution (on monitor) is 800x600.
•
Support for 32 bit True Color
•
Minimum of 8 Mbytes of high speed Video RAM, expandable to at least 16 Mbytes.
•
128-bit internal memory interface.
•
Hardware supported asynchronous bit block transfer (80 Mpixels/sec).
-
5 - 18
02
EVISION
5 PCI slots on Mother Board
Power and Internal PCI control signals
Section 5-4 - Back End Processor
V
7 / V
7 PRO S
IVID
IVID
ERVICE
M
ANUAL
Table of Contents
