Table of Contents
GE M
S
EDICAL
YSTEMS
D
FC091194, R
IRECTION
4-3-15
Cineloop Check
4-3-15-1
Introduction
A cineloop is a sequence of images recorded over a certain time frame. When using ECG the time frame
can be adjusted to cover one or more heart cycles. When frozen the System automatically displays the
cineloop boundary markers on either side of the last detected heart cycle
ECG
4-3-15-2
Preparation
Use a phantom when doing these tests.
1.) Connect one of the probes, to the scanner's left-most probe connector.
-
-
2.) Turn ON the scanner
-
The 2D Mode window is displayed (default mode).
3.) Press FREEZE. to freeze the image.
4.) Press the Assignable CINELOOP.
4 - 52
02
EVISION
Loop display
Figure 4-19 The Cineloop controls display
See
Probe
Connection, page
See Probes, page
9-28
See
4-2-1 - Power ON/ Boot Up
Section 4-3 - Functional Checks
Left marker
Current frame
Right marker
3-13
for info about connecting the probes
for available probes
on page
4-2
for info about booting the scanner.
V
7 / V
7 PRO S
IVID
IVID
ERVICE
(Figure
4-19).
Cine speed
(replay)
M
ANUAL
Table of Contents
