Window Slider Kit Installation - Black & Decker BPACT08WT Instruction Manual

SET UP & USE

Your window slider kit has been designed to fit most standard "Vertical" and

"Horizontal" window applications; however, it may be necessary for you to

improvise/modify some aspect of the installation procedures for certain types of

windows. Minimum and maximum window openings:

MAXIMUM: 48.4" (123 cm)

NOTE: · A plastic locking pin is holding the window slider kit together during shipment. Prior

to installation, remove plastic locking pin, adjust to desired length and use provided

metal locking screws to secure.

NOTE: · If the window opening is less than 26.5", the minimum length of the window slider

kit, cut the one with a hole in it short to fit for the window opening. Never cut out

the hole in window slider kit.

Horizontal Window

DOUBLE-HUNG SASH/SLIDING CASEMENT WINDOW

INSTALLATION

1. Cut the foam seal (adhesive type) to the proper length and attach it to the

window sash.

2. Attach the window slider kit to the

window sash. Adjust the length of

the window slider kit according to

the width of window. Shorten the

adjustable window kit if the width

of window is less than 26.5".

3. Cut the foam seal (adhesive type)

to the proper length and attach it

on the top of the window.

4. Close the window securely against

the window slider kit.

5. Secure the window slider kit to the

window sash.

6. Cut the foam seal to an appropriate

length and seal the open gap

between the top window frame and

outer window frame.

MINIMUM: 26.5" (67.5 cm)

Vertical Window

Window Slider Kit

Window slider kit can be secured by

inserting the locking screw

Cut on opposite

side of hole

Page 11