Window Slider Kit Installation - Black & Decker BPT05WTBA Instruction Manual

SET UP & USE

Your window slider kit has been designed to fit most standard "Vertical" and

"Horizontal" window applications; however, it may be necessary for you to

improvise/modify some aspect of the installation procedures for certain types of

window. Minimum and maximum window openings:

MAXIMUM : 50" (127 cm)

NOTE: · A plastic locking screw is holding the window slider kit together during shipment.

Prior to installation, remove the locking screw, adjust to desired length and use

provided locking screw to secure.

NOTE: · If the window opening is less than 20.5" the minimum length of the window slider

kit, cut the one with a hole in it short to fit for the window opening. Never cut out

the hole in window slider kit.

Horizontal Window

DOUBLE-HUNG SASH/SLIDING CASEMENT

WINDOW INSTALLATION

1. Cut the foam seal (adhesive type)

to the proper length and attach it

to the window sash.

2. Attach the window slider kit to the

window sash. Adjust the length of

the window slider kit according to

the width of window. Shorten the

adjustable window kit if the width

of window is less than 20.5".

3. Cut the foam seal (adhesive type)

to the proper length and attach it

on the top of the window.

4. Close the window securely against

the window slider kit.

5. Secure the window slider kit to the

window sash.

6. Cut the foam seal to an

appropriate length and seal the

open gap between the top window

frame and outer window frame.

MINIMUM : 20.5" (52 cm)

Vertical Window

Window Slider Kit

Foam

Seal

Window Sash

Window

Slider Kit

Window

Slider Kit

Foam

Seal

Window slider kit can be secured

by inserting the locking screw

Cut on opposite

side of hole.

Locking

screw

Foam

20.5"~50"

Window

Slider Kit

Window

Slider Kit

Foam

Page 11

Seal

Seal