Window Slider Kit Installation - Black & Decker BP05PWA Instruction Manual

SET UP & USE

Your window slider kit has been designed to fit most standard "Vertical" and

"Horizontal" window applications; however, it may be necessary for you to

improvise/modify some aspect of the installation procedures for certain types of

window. Minimum and maximum window openings:

MAXIMUM : 47.2" (120 cm)

NOTE: · Adjust the length of the window slider kit according to the window width or height,

and secure it with the provided locking screws.

NOTE: · If the window opening is less than 27.5" the minimum length of the window slider kit,

cut the one with a hole in it short to fit for the window opening. Never cut out the

hole in window slider kit.

Horizontal Window Vertical Window

DOUBLE-HUNG SASH/SLIDING CASEMENT

WINDOW INSTALLATION

1. Cut the foam seal (adhesive type) to the proper length and attach it to the

window sash.

2. Attach the window slider kit to the

window sash. Adjust the length of

the window slider kit according to

the width of window. Shorten the

adjustable window kit if the width

of window is less than 27.5".

3. Cut the foam seal (adhesive type)

to the proper length and attach it

on the top of the window.

4. Close the window securely

against the window slider kit.

5. Secure the window slider kit

to the window sash.

6. Cut the foam seal to an

appropriate length and seal the

open gap between the top window

frame and outer window frame.

MINIMUM : 27.5" (70 cm)

Window Slider Kit

Window slider kit can be secured

by inserting the locking screw

Locking

screw

Foam

Seal

Window Sash

Window

Slider Kit

Window

Slider Kit

Foam

Seal

Cut on opposite

side of hole.

Foam

Seal

27.5"– 47.2"

Window

Slider Kit

Window

Slider Kit

Foam

Seal

Page 11