Table of Contents
Available languages
Available languages
SET UP & USE
CONTROL PANEL
Heat
(Heat models BPACT12HWT
and BPACT14HWT only)
Fan
Dehumidify
Cool
Mode Selection
Button
Decrease Temp
Button
Pictures are for illustration purpose only. Your model may or may not have all the features.
OPERATING FROM THE CONTROL PANEL
The Control Panel enables you to manage all the main functions of the appliance, but
to fully utilize its potential, you must use the remote control unit.
TURNING THE APPLIANCE ON
• Press the
button until the appliance turns on. The last function active when it was
turned off will appear.
• Never turn the air conditioner off by unplugging from the main power supply.
Always press the button
allows the appliance to perform a cycle of checks to verify operation.
NOTE: Before pressing the Power
the rear of the unit is securely in place to avoid any leaking.
• Press the MODE
up.
, then wait for a few minutes before unplugging. This
button until the light corresponding to the required Mode lights
*Heat models BPACT12HWT and BPACT14HWT only
Display Area
LOW
AUTO
Increase Temp
Button
ON/OFF
button, make sure the condensate drain plug in
HIGH
MED
Fan Speed
Selection Button
Page 13
Hide quick links:
Chapters
Table of Contents
Troubleshooting
