Table of Contents
Digging and Loading Level Ground
IMPORTANT: While excavating with the bucket or fork,
never apply excessive traction force to the tooth tips
with the bucket or fork tilted more than 10°. Failure
to do so may result in cracks or damage to the front
attachment.
Slightly position the bucket teeth downward (0 to 10
degrees) and dig the ground while driving the machine
forward as described below. Always take care not to apply
loads to only to one side of the bucket.
1. Position the bucket teeth slightly downward.
2. While driving the machine forward, tilt the bucket so
that the ground surface is gradually separated.
3. Adjust the digging depth by operating the lift arm.
4. Drive the machine with the bucket tilted backward fully
and held at the lowest possible position.
OPERATING MACHINE
5-16
M4GB-05-007
M4GB-05-008
M4GB-05-009
M4GB-05-010
Table of Contents
