Table of Contents
Starting to Move
d
WARNING: Start to move the machine only after
checking that no personnel and/or obstacles are
present around the machine.
Never turn ride control switch (5) to ON position
when traveling the machine or raising the bucket.
Before turning the ride control switch (5) ON, stop the
machine and confirm the safety around the bucket.
Avoid turning ride control switch (5) to ON position
while traveling the machine. Failure to do so may
automatically move the lift arm up or down.
Refer to page 1-106 for detailed information of ride control
switch (5).
1. Check that none of the warning indicators except
parking brake indicator (1) on the monitor panel is ON.
2. Set the front attachment in the driving position by
operating control levers (2) (3).
3. Turn neutral lever lock (4) to the UNLOCK (
DRIVING MACHINE
2
) position.
A
4-2
3
Driving Position
A: 300 mm
1
MNEK-01-500
5
MNEC-07-001
90Z7B-4-1-1US
4
MNEC-01-037
Table of Contents
