Table of Contents
Epsilon Eb and E Series EN Drives Reference Manual
APS Input Specification
Voltage Range
18-30 VDC
Drive Logic with Motor Encoder Only Add for Master Encoder
APS Applied
Voltage
Current Draw per
drive
550
(mA RMS)
Caution
Do not wire AC line power into the APS input. Doing so will damage the drive.
Warning
Do not open the APS jumper access until at least 6 minutes has elapsed after the main AC
power has been removed from the L1 and L2 terminals.
Note
Connecting 24V common on the APS to chassis ground reduces offset voltage in the
Analog Diagnostics Outputs.
168
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Current
0.5 A maximum
0.7 A peak
( 0.4 A maximum
0.76 A peak if external
encoder is not used )
18
24
28
400
360
Inrush Current
80 A for 1 ms if not limited by power
supply
Other Dependancies
18
24-28
Add 10% per axis for fewer
than 4 axis on same A.P.S.
power supply.
110
75
- Quick Links:
- Overview
- Fault Codes
- Drive Faults
Hide quick links:
Table of Contents
