Writing Commands - Mitsubishi Electric MELSERVO-J3 Series Manual
Hide thumbs
Also See for MELSERVO-J3 Series:
- Instruction manual (802 pages) ,
- Manual (668 pages) ,
- Handbook (590 pages)
Table of Contents
Part 5: Common Reference Material
4.4.2 Writing commands
(1) Status display (command [8] [1])
Command Data No.
[8] [1]
[0] [0]
Status display data deletion
(2) Parameters (command [8] [4]/[9] [4]/[8] [5])
Command Data No.
[8] [4]
[0] [1] to
Write of parameters
[F] [F]
Writes the values of the
parameters in the parameter
group specified with the
command [8] [5] data No. [0] [0].
Before writing the values,
therefore, always specify the
parameter group with the
command [8] [5] data No. [0] [0].
The decimal equivalent of the
data No. value (hexadecimal)
corresponds to the parameter
number.
[8] [5]
[0] [0]
Parameter group write
0000: Basic setting parameter
0001: Gain filter parameter ([Pr.
0002: Extension setting
0003: I/O setting parameter ([Pr.
(3) External I/O signals (command [9] [2])
Command Data No.
[9] [2]
[6] [0]
Communication input device signal
(4) Alarm history (command [8] [2])
Command Data No.
[8] [2]
[2] [0]
Alarm history clear
Description
MR-J3-_A_
Description
Setting range Frame length
Depending on
the parameter
0000 to 0003
([Pr. PA_ _ ])
PB_ _ ])
paramete
([Pr. PC_ _ ])
r
PD_ _ ])
Description
Description
MR-J3-_A_/MR-J4-_A_
Description
8
Writing each parameter
Writes the values of the
parameters in the parameter
group specified with the
command [8] [5] + data No. [0]
[0]. Before writing the values,
therefore, always specify the
parameter group with the
command [8] [5] + data No. [0]
[0].
The decimal equivalent of the
data No. value (hexadecimal)
corresponds to the parameter
No.
Command [9] [4]: Frame length
12 is available.
4
Parameter group writing
0000: Basic setting parameters
([Pr. PA_ _ ])
0001: Gain/filter parameters
([Pr. PB_ _ ])
0002: Extension setting
parameters ([Pr. PC_ _ ])
0003: I/O setting parameters
([Pr. PD_ _ ])
0004: Extension setting 2
parameters ([Pr. PE_ _ ])
0005: Extension setting 3
parameters ([Pr. PF_ _ ])
MR-J3-_A_/MR-J4-_A_
Refer to section 4.5.5.
MR-J3-_A_/MR-J4-_A_
5 - 73
Setting range
Frame length
1EA5
4
MR-J4-_A_
Setting range Frame length
Depending on
the parameter
0000 to 0005
Setting range
Frame length
Setting range
Frame length
1EA5
8
4
8
4
Hide quick links:
Table of Contents
