Table of Contents
IndraControl XM42 Controls
7 Technical data
Processor
RAM
Connection for extension mod-
ules
Extension bus
Number of possible modules
Connection for S20 I/O
S20 bus parameters
Transmission rate
Number of connectable mod-
ules
Max. current for the S20 bus
(U
)
Bus
Communication interfaces
IndraControl XM4: Intel® Core™ i Dual Core 6th generation
4 GByte DRAM DDR4
Via the bus base XA-BS03
3
Via the bus base XA-BS03
100 MBit/s
Max. 63 (per station)
2 A
RJ-45 connections:
1 × Ethernet connection (10 MB, 100 MB, 1 GB)
●
2 × Sercos III master-slave interfaces
●
2 × Ethernet field bus master-slave interfaces
●
USB ports:
1 × USB host, maximum cable length 3 m (for the functionality,
●
refer to the system description of the respective system).
The USB memory sticks with the file systems FAT16 and FAT32
are supported.
Plugging in and removing the USB memory medium at
runtime is generally possible. However, it can cause a
temporarily increased runtime behavior and motion
cycle time exceedances or PLC and hardware watch-
dogs in case of a high control load. Thus, plug in or re-
move a USB memory medium only in an uncritical ma-
chine state (e.g. home position)!
1 × USB device, maximum cable length 3 m (for the functionality,
●
refer to the system description of the respective system).
R911345566_Edition 03 Bosch Rexroth AG
9/65
Technical data
Hide quick links:
Table of Contents
