Basic Hardware - Bosch DSA E Series Installation Manual
Iscsi disk arrays
Hide thumbs
Also See for DSA E Series:
- Installation manual (54 pages) ,
- Installaton manual (50 pages) ,
- Quick installation manual (30 pages)
Table of Contents
E2600 DSA E-Series iSCSI Disk Arrays
2.2.1
Basic Hardware
Table 2.2 Basic Hardware
Bosch Security Systems
Preparing for an E2600 Controller-Drive Tray Installation | en
Item
Cabinet
–
Make sure that your cabinet meets the
installation site specifications of the
various E2600 storage array
components. Refer to the Storage
System Site Preparation Guide for
more information.
–
Depending on the power supply
limitations of your cabinet, you might
need to install more than one cabinet
to accommodate the different
components of the E2600 storage
array. .
DE1600 drive tray with end caps that are
packaged separately.
Mounting rails and screws
The mounting rails that are available with
the drive tray are designed for an industry-
standard cabinet.
Fibre Channel switch (optional)
SAS switch (optional)
Gigabit Ethernet switch (optional)
–
Host with Fibre Channel host bus
adapters (HBAs) (optional)
–
Host with iSCSI HBAs (optional) or a
network interface card (optional)
–
Host with SAS HBAs (optional)
Installation Manual
13
Included with the
Controller-Drive
Tray
Yes
- | V2 | 2012.09
Table of Contents
