Replacing The Host Interface Card In The Controller-Drive Tray - Bosch DSA E Series Installation Manual
Iscsi disk arrays
Hide thumbs
Also See for DSA E Series:
- Installation manual (54 pages) ,
- Installaton manual (50 pages) ,
- Quick installation manual (30 pages)
Table of Contents
124 en | Replacing a Controller Canister and Related Components
17.2
Replacing the Host Interface Card in the Controller-Drive Tray
1.
2.
NOTICE!
The front bezel can suddenly pop loose and cause damage to either the front bezel flex
harness or the zero insertion force (ZIF) socket that is attached to the controller card. Make
sure that you gently angle the front bezel away from the controller canister to allow access to
the HIC.
Figure 17.8 E2600 Controller Cover and Internal Parts
1
2
3
- | V2 | 2012.09
Disconnect the front bezel flex harness by gently opening the zero insertion force (ZIF)
socket.
Remove the screws holding the front bezel to the controller canister.
1
2
3
4
5
Top Cover Latch Buttons
HIC Thumbscrews
Host Interface Card
Installation Manual
E2600 DSA E-Series iSCSI Disk Arrays
6
7
98014-02
Bosch Security Systems
Table of Contents
