Information - Daikin Altherma 3 GEO Series Installer's Reference Manual
Hide thumbs
Also See for Altherma 3 GEO Series:
- Installer's reference manual (252 pages) ,
- Installation manual (40 pages) ,
- User reference manual (36 pages)
Table of Contents
2 Do one of the following:
If you want to...
Completely deactivate
Select Off.
quiet mode
Result: The unit never runs in
quiet mode. The user cannot
change this.
Manually activate a quiet
Select Manual.
mode level
Go to [7.4.3] Level and select
the applicable quiet mode
level. Example: Most quiet.
Result: The unit always runs
in the selected quiet mode
level. The user cannot change
this.
Enable the user to
Select Automatic.
program a quiet mode
Result: The unit runs in quiet
schedule
mode according to a
schedule. The user (or you)
can program the schedule in
[7.4.2] Schedule. For more
information about scheduling,
see
"10.3.7 Schedule screen:
Example" [ 4 59].
Electricity prices
Only applicable in combination with the bivalent function. See also
"Bivalent" [ 4 82].
#
Code
[7.5.1]
N/A
Electricity price > High
[7.5.2]
N/A
Electricity price > Medium
[7.5.3]
N/A
Electricity price > Low
INFORMATION
Electricity price can only be set when bivalent is ON
([9.C.1] or [C-02]). These values can only be set in menu
structure [7.5.1], [7.5.2] and [7.5.3]. Do NOT use overview
settings.
To set the electricity price
1 Go to [7.5.1]/[7.5.2]/[7.5.3]: User settings >
Electricity price > High/Medium/Low.
2 Select the correct electricity price.
3 Confirm the changes.
4 Repeat this for all three electricity prices.
INFORMATION
Price value ranging from 0.00~990 valuta/kWh (with 2
significant values).
INFORMATION
If no schedule is set, the Electricity price for High is
taken into account.
To set the electricity price schedule timer
1 Go to [7.5.4]: User settings > Electricity
price > Schedule.
2 Program the selection using the scheduling screen.
You can set the High, Medium and Low electricity
prices according to your electricity supplier.
3 Confirm the changes.
EGSAH/X06+10DA9W(G)
Daikin Altherma 3 GEO
4P569820-1A – 2019.09
—
Then...
Description
—
—
INFORMATION
The values correspond with the electricity price values for
High, Medium and Low previously set. If no schedule is set,
the electricity price for High is taken into account.
About energy prices in case of an incentive per kWh renewable
energy
An incentive can be taken into account when setting the energy
prices. Although the running cost can increase, the total operation
cost, taking into account the reimbursement will be optimized.
NOTICE
Make sure to modify the setting of the energy prices at the
end of the incentive period.
To set the electricity price in case of an incentive per kWh
renewable energy
Calculate the value for the electricity price with following formula:
▪ Actual electricity price+Incentive/kWh
For the procedure to set the electricity price, see
price" [ 4 77].
electricity
Example
This is an example and the prices and/or values used in this
example are NOT accurate.
Data
Electricity price
Renewable heat incentive per
kWh
Calculation of the electricity price:
Electricity price=Actual electricity price+Incentive/kWh
Electricity price=12.49+5
Electricity price=17.49
Price
Electricity: 12.49 /kWh
10.5.8
Information
Dealer information
The installer can fill in his contact number here.
#
Code
[8.3]
N/A
Number that users can call in case of
problems.
Possible read-out information
In menu...
[8.1] Energy data
[8.2] Malfunction history
[8.3] Dealer information
[8.4] Sensors
[8.5] Actuators
[8.6] Operation modes
[8.7] About
10 Configuration
"To set the
Price/kWh
12.49
5
Value in breadcrumb
[7.5.1]=17
Description
You can read out...
Produced energy, consumed
electricity, and consumed gas
Malfunction history
Contact/helpdesk number
Room, tank or domestic hot
water, outside, and leaving water
temperature (if applicable)
Status/mode of each actuator
Example: Domestic hot water
pump ON/OFF
Current operation mode
Example: Defrost/oil return
mode
Version information about the
system
Installer reference guide
77
- Quick Links:
- General
- Electrical
Hide quick links:
Table of Contents
Troubleshooting
