NEC Univerge NEAX 2000 IPS Command Manual page 401
Internet protocol server
Hide thumbs
Also See for Univerge NEAX 2000 IPS:
- Installation manual (619 pages) ,
- System manual (448 pages) ,
- Reference manual (421 pages)
Table of Contents
COMMAND CODE TITLE:
35
Y
No.
MEANING
279
Pattern number for adding
an access code for outgoing
call to the calling number
stored by Message Reminder
when terminating a tandem
call via CCIS
[Series 3800]
281
Calling party number relay-
ing in ISDN to ISDN/CCIS
to ISDN connection (for
incoming trunk route)
[For EU]
[Series 3800]
NOTE 1:
This command must be set for incoming trunk route.
NOTE 2:
Calling party number relaying in ISDN tandem connection is available when both CM35 Y=281 and
CM35 Y=282 are set to 0.
282
Calling party number relay-
ing in ISDN to ISDN/CCIS
to ISDN connection (for out-
going trunk route)
[For EU]
[Series 3800]
NOTE 1:
This command must be set for outgoing trunk route.
NOTE 2:
Calling party number relaying in ISDN tandem connection is available when both CM35 Y=281 and
CM35 Y=282 are set to 0.
283
TEI (Terminal Endpoint
Identifier) assignment for
ISDN terminals
BRT INITIAL
[Series 3800]
NOTE:
Automatic TEI assignment (second data 0) is effective only when CM35 Y=79 is set to 1 (Point-to-
Multipoint).
TRUNK ROUTE DATA
DATA
0
Pattern No. 0
7
Pattern No. 7
NONE
No data
0
To provide
3
Not provided
0
To provide
3
Not provided
0
Automatic TEI assignment (TEI=64-126)
1
Non-Automatic TEI assignment (TEI=0)
SETTING DATA
MEANING
– 377 –
CM35
: Initial Data
RELATED
COMMAND
CM50 Y=11
CM35 Y=282
CM35 Y=281
CM35 Y=79
Continued on next page
NWA-008844-001 Rev.5.0
91ch3003.fm
NOVEMBER/15/2006
Table of Contents
