NEC Univerge NEAX 2000 IPS Command Manual page 389
Internet protocol server
Hide thumbs
Also See for Univerge NEAX 2000 IPS:
- Installation manual (619 pages) ,
- System manual (448 pages) ,
- Reference manual (421 pages)
Table of Contents
COMMAND CODE TITLE:
35
Y
No.
MEANING
145
Calling party information
transfer to ISDN on tandem
call from CCIS/SIP
Calling party information
transfer to Enhanced 911
route on tandem call from
CCIS
[North America Only]
147
Kind of Call Forwarding-
Don't Answer (No Answer)
key assigned to ATTCON/
DESKCON
148
System operation when the
station, after holding the
other trunk (TRUNK-A), has
made a switch hook flash
while talking with another
trunk (TRUNK-B)
150
CID Call Back
152
Verification of Connection
for Event Based CCIS
153
ISDN answer signal sending
timing for Event Based
CCIS
154
Information Transfer Capa-
bility of ISDN line used for
Event Based CCIS
155
Calling party number is used
as the ID Code for Remote
Access to System (DISA)
TRUNK ROUTE DATA
DATA
0
To provide
1
Not provided
0
To provide
1
Not provided
0
Call Forwarding-Don't Answer (No Answer)
key assigned by CM90 Y=00: F6068
1
Call Forwarding-Don't Answer (No Answer)
key assigned by CM90 Y=00: F6063
0
Broker's Call
TRUNK-B is held, and station returns to the
connection with TRUNK-A.
1
Three-way Calling
0
To provide
1
Not provided
0
To provide
1
Not provided
0
Send when the called party answers the call
1
Send before the called party answers the call
NOTE:
5
3.1 kHz audio
6
Speech
7
Unrestricted digital information
0
Available
1
Not available
NOTE:
SETTING DATA
MEANING
Be sure to set the same data to opposite
office.
Assign this data only for Ring down
connection.
– 365 –
CM35
: Initial Data
RELATED
COMMAND
CM90
CM12 Y=38
CM2A Y=15, A0
Continued on next page
NWA-008844-001 Rev.5.0
91ch3003.fm
JUNE/01/2007
Table of Contents
