Introduction; Purpose; Outline Of This Manual - NEC Univerge NEAX 2000 IPS Command Manual
Internet protocol server
Hide thumbs
Also See for Univerge NEAX 2000 IPS:
- Installation manual (619 pages) ,
- System manual (448 pages) ,
- Reference manual (421 pages)
Table of Contents
INTRODUCTION
PURPOSE
This manual explains all of the commands required for programming the NEAX 2000 IPS, using the Cus-
tomer Administration Terminal (CAT) or Maintenance Administration Terminal (MAT).
OUTLINE OF THIS MANUAL
This manual consists of four chapters. The following paragraphs summarize Chapters 1 through 4.
CHAPTER 1
CHAPTER 2
CHAPTER 3
CHAPTER 4
APPENDIX A LEN ASSIGNMENT
APPENDIX B TERMINAL KEY ASSIGNMENT
HOW TO USE CAT
This chapter explains how to use the Customer Administration Terminal (CAT)
which is used as the man-machine interface with the PBX.
PRECAUTION
This chapter explains precautions for using commands, such as condition for using
commands, method of setting on-line/off-line mode, port allocation, password
entry, and nation code assignment.
COMMAND DESCRIPTION
This chapter explains the function, precaution, assignment procedure and data table
of each command.
RESIDENT SYSTEM PROGRAM
This chapter explains how to load the Resident System Program and the service
conditions, and contains the data table.
This appendix contains the location of Line Equipment Number (LEN) for each
system configuration and the data assignment.
This appendix contains the key number layout of each D
DESKCON, DSS Console, and Add-On Module.
PURPOSE/OUTLINE OF THIS MANUAL
– 1 –
INTRODUCTION
term
, ATTCON,
NWA-008844-001 Rev.5.0
91ch0001.fm
JULY/01/2006
Table of Contents
