Marking Atex Directive - Honeywell SLG 700 User Manual
Smartline level transmitter guided wave radar
Hide thumbs
Also See for SLG 700:
- Option manual (220 pages) ,
- User manual (198 pages) ,
- Quick start manual (40 pages)
Table of Contents
9.4 Marking ATEX Directive
General
The following information is provided as part of the labeling of the transmitter:
Name and Address of the manufacturer
Notified Body identification: SIRA
For complete model number, see the Model Selection Guide for the particular model
of pressure transmitter.
The serial number of the transmitter is located on the Meter Body data-plate. The first
two digits of the serial number identify the year (02) and the second two digits
identify the week of the year (23); for example, 0223xxxxxxxx indicates that the
product was manufactured in 2002, in the 23 rd week.
Apparatus Marked with Multiple Types of Protection
The user must determine the type of protection required for installation of the equipment. The
user shall then check the box [ ] adjacent to the type of protection used on the equipment
certification nameplate. Once a type of protection has been checked on the nameplate, the
equipment will not be reinstalled using any of the other certification types.
Revision 7
SLG 700 SmartLine Level Transmitter User's Manual
Page 153
Table of Contents
