In-Stand And Out-Of-Stand Defaults; Presentation Modes - Honeywell Voyager 1250g User Manual

Single-line laser scanner
Hide thumbs Also See for Voyager 1250g:
Table of Contents
Caution: When working with In-Stand and Out-of-Stand settings, enable

In-Stand and Out-of-Stand Defaults

If you want the In-Stand or Out-of-Stand default settings restored to your scanner,
scan the appropriate Defaults bar code below. They reset the scanner to the cus-
tom default settings (see
defaults, it will reset the scanner to the factory default settings. Any settings that
have not been specified through the custom defaults will be defaulted to the fac-
tory default settings.

Presentation Modes

When the scanner is in the stand, by default, bar codes are automatically read
when they are detected in the scanner's field of view. When the scanner is out of the
stand, by default you must pull the trigger to read a bar code. Use the following
commands to adjust how the scanner behaves when it is out of the stand.
Presentation Mode Out-of-Stand: When the scanner is not in the stand, it auto-
matically detects bar codes, then scans and transmits the data. The laser turns off
afterward. (If you are accustomed to a Voyager 9520, this setting is the same as the
9520's default.)
Presentation Mode with CodeGate® Out-of-Stand: When the scanner is not in the
stand, it automatically detects bar codes and decodes them. However, the data is
not transmitted until you pull the trigger. The laser remains on briefly after the
transmission. (If you are accustomed to a Voyager 9540, this setting is the same as
the 9540's default.)
Voyager 1250g User Guide
the settings you want before disabling those you do not want to
use. If you disable settings first, you may program the scanner
so it is unable to read bar codes. if this happens, power cycle the
scanner and scan the defaults bar code on
In-Stand Defaults
Presentation Mode
Out-of-Stand
Set Custom Defaults
page
6.
on page 5). If there are no custom
Out-of-Stand Defaults
47

Hide quick links:

Table of Contents
loading

Table of Contents