Hitachi IJ RX2 Technical Manual page 151

Ink jet printer for industrial marking
Hide thumbs Also See for IJ RX2:
Table of Contents
Perform nozzle property test printing.
4
● When "Print trigger source" is
When "Print trigger source" is
● During the nozzle property test, the state of creation of the ink drops may become
poor and an "Ink Drop Charge Too High" or other fault may be generated and the ink
may stop, depending on the Excitation V value.
In this case, after cleaning the print head, eject the ink again. (Refer to par. "3.1.2
When an error occurred at the start of operation" of the instruction manual and
perform the same work.)
The possibility of fault is high when Excitation V is set less than 5. When performing
test printing again, start from setting 10 and test print while decrementing.
Check the printed result.
5
● Check the Excitation V range at which printing is good. The center of that range is the optimum
value.
Ambient
Check date
temperature
2015.07.07
25 C
Update the Excitation V-ref. value.
6
(a) At the end of test printing, press [Abort] of the "Nozzle property test"
screen and return to the "Excitation V update" screen.
(b) Change "Excitation V-ref." to the optimum value confirmed at step 5 .
Excitation V-ref.
Ref. ambient temperature
When the screen is returned to the "Maintenance menu" by Back
7
set value change is complete.
● Repeat print setting is disabled during the nozzle property test.
Only one printing is performed by one input signal.
● Product speed matching setting is disabled during the nozzle property test.
The character width may be different from the actual character width.
, press Start printings .
Button input
, input the sensor signal.
Sensor
CAUTION
(Example) Printing good range 5 to 15→Optimum value 10
0
1
2
3
4
5
6
×
×
×
Change to optimum value.
10
  (0∼19)
(℃)
25
Changes to current ambient temperature.
CAUTION
O: Good
Excitation V value
7
8
9 10 11 12 13 14 15 16 17 18 19
: Bad Space: Not checked
×
optimum
value
×
×
×
×
10
Abort
Abort
Start
printings
,
Back
●Excitation V adjustment 6-28

Hide quick links:

Table of Contents
loading

Table of Contents