Table of Contents
(
b) Remove the cap, then drain the ink remaining in the ink reservoir.
* Clean the inside of the reservoir with makeup.
Ink reservoir
Beaker
(
c) Fill the reservoir with new ink.
* Fill the reservoir at least 2/3 full of the ink. Be careful of overfilling.
Ink reservoir
Cap
(
Fasten the cap of the ink reservoir.
d)
● Fasten it securely. Solvent components may evaporate.
(
e) Push in the reservoir to return it to the original position.
(
f) Place the end of the print head in a beaker
● Provide against an ink beam bend.
(
g) Press the Start/Continue key.
6-7 ●Replacing the ink
Cap
.
CAUTION
If ink is accidentally spilt, wipe it up
promptly with wiping paper or
something similar.
In addition, do not close the
maintenance cover until you are
sure that the wiped portion has
completely dried.
CAUTION
If ink is accidentally spilt, wipe it up
promptly with wiping paper or
something similar.
In addition, do not close the
maintenance cover until you are
sure that the wiped portion has
completely dried.
Hide quick links:
Table of Contents
Related Manuals for Hitachi IJ RX2
Related Products for Hitachi IJ RX2
- Hitachi IJ PH
- Hitachi IJ UX
- Hitachi IJ UX2
- Hitachi IPJ-AW250N
- Hitachi Innovate iPJ-AW250NM
- Hitachi IC25N040ATCS04-0 - Travelstar 40GN 40GB UDMA/100 4200RPM 2MB 2.5" IDE Hard Drive
- Hitachi IC25N080ATMR04-0 - 3E034 - Dell 80GB Laptop Hard Drive
- Hitachi IC25N040ATMR04-0 - Travelstar 40GB Laptop Hard Drive 9.5mm 2.5 Inch Notebook HDD