Table of Contents
6.3 Replacing the ink
(1) Overview
● This operation is performed when replacing old ink with new ink.
● Consecutively performs from ink drainage to ink replacement to ink refilling.
● Do not perform this operation while ink is being ejected. Perform it after setting the IJ printer to the "Stop"
state.
*If replacement of the filters is matched to replacement of the ink, ink will not be wasted.
*When performing ink drainage or ink refilling separately, proceed by selecting each function at menu
2 of the Circulation control screen.
(2) Operation
Display the Circulation control screen and press the Ink replacement →
1
Start/Continue .
Ink replacement
Drain ink in accordance with the operation guide on the screen.
2
● When you want to stop drainage, press Abort .
● When abort processing was performed, repeat operation from step .
(
a) Change the direction of the ink filter so that tubes become the bottom, disconnect the
recovery block from the main ink tank and put it in a beaker.
Circulation control
Eject ink
Cleaning stop
(Goes to Standby)
Recovery-line
Nozzle backwash
cleaning
Ink filter
Ink replacement
replacement
Process prior to
Process after
long-term shutdown
long-term shutdown
Select option; press [Start/Cont.]
Recovery tube
[Stop ]
Com=0
No-cleaning stop
Ink circulation
Makeup refill
Proc. status:
Ink filter
Ink filter tubes
2015.07.07 12:45
HOME
Prev.Dsp. Next Dsp.
Cancel
Start/Continue
Start/Continue
1
●Replacing the ink 6-4
Hide quick links:
Table of Contents
