Table of Contents
Quick Links
Model No. HRTL61706.0
Serial No.
USER'S MANUAL
Serial Number Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-922-4222
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
www.healthriderservice.com
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
www.healthrider.com
this equipment. Save this manual
new products, prizes,
for future reference.
fitness tips, and much more!
Table of Contents
Related Manuals for Healthrider HRTL61706.0
Summary of Contents for Healthrider HRTL61706.0
- Page 1 Model No. HRTL61706.0 Serial No. USER'S MANUAL Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY.
-
Page 2: Table Of Contents
LIMITED WARRANTY ............. .Back Cover HealthRider is a registered trademark of ICON IP, Inc. -
Page 3: Important Precautions
11. Use only a single-outlet surge suppressor that meets all of the specifications described on page 12. To purchase a surge suppressor, see your local HealthRider dealer or call the toll-free telephone number on the front cover of this manual and order part number 146148, or see your local electronics store. - Page 4 20. Never leave the treadmill unattended while it is running. Always remove the key, unplug the power cord, and switch the reset/off cir- cuit breaker to the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the circuit breaker.) 21.
-
Page 5: Before You Begin
To help us assist you, please note the product model number and serial number before contacting us. The model number of the treadmill is HRTL61706.0. The serial number can be found on a decal attached to the treadmill (see the front cover of this manual for the location). -
Page 6: Assembly
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. - Page 7 2. Remove the packing insert from the location shown in each side of the Base (81) (only one side is shown). If necessary, use a tool to help pry out the insert. Then, discard the insert. Slide a Front Endcap (80) onto the Base (81). Partially tighten a Endcap Screw (79) into the Front Endcap and the base.
- Page 8 5. With the help of a second person, carefully raise the Left Upright (70) and the Right Upright (not shown) to a vertical position. Remove the knob from the pin. Make sure that the collar and the spring are on the pin. (Note: If there are two collars, place one on each side of the spring.) Then, insert the pin into the Latch Housing (71), and tighten the knob onto the pin.
- Page 9 8. While a second person holds the console as- sembly near the Pulse Bar (66), connect the Ground Wire (107) on the Pulse Bar to the ground wire from the console assembly. Connect the wire from the console assembly to the Upright Wire (75).
- Page 10 11.Lower the Uprights (70, 76) as shown. Start the two indicated Console Screws (67) into the Left and Right Uprights (70, 76) and the con- sole assembly. If necessary, pull back on the console assembly slightly to align the holes in the Uprights with those on the console assem- bly.
- Page 11 If you purchase the optional chest pulse sensor (see page 19), follow the steps below to install the receiver included with the chest pulse sensor. 1. Remove the key from the console and unplug the power cord. Remove the 3/4" Screw (23) and the Access Door (100) from the back of the Console Base (98).
-
Page 12: Operation And Adjustment
(see drawing 1 at the right). To purchase a surge suppressor, see your local HealthRider dealer or call the toll-free telephone number on the front cover of this man- ual and order part number 146148, or see your local electronics store. - Page 13 CONSOLE DIAGRAM Note: If there is a sheet of clear plastic on the face of the console, remove it. FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec- tive. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button.
- Page 14 HOW TO TURN ON THE POWER Plug in the power cord (see page 12). Locate the reset/off circuit breaker near the power cord. Make sure that the circuit breaker is in the reset position. Stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing on page 13) and slide the clip onto the waistband of your clothes.
- Page 15 Follow your progress with the display. When the manual mode is se- lected, the lower part of the display will show a 1/4-mile track. As you walk or run, the indicators around the track will appear in succession until the entire track appears.
- Page 16 HOW TO USE A PRESET PROGRAM Insert the key fully into the console. See HOW TO TURN ON THE POWER on page Enter your weight if desired. See step 2 on page 14. Select one of the preset programs. To select one of the preset pro- grams, press...
- Page 17 Follow your progress with the display. See step 6 on page 15. Measure your heart rate if desired. See step 7 on page 15. Turn on the fan if desired. See step 8 on page 15. When you are finished exercising, remove the key from the console.
- Page 18 When only three seconds remain in the first seg- ment of the program, both the Current Segment column and the column to the right will flash and a series of tones will sound. If the speed and/or in- cline of the treadmill is about to change, the speed setting and/or the incline setting will flash in the display to alert you.
- Page 19 THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also al- lows you to select miles or kilometers as the unit of measurement and to turn on and turn off the demo mode.
-
Page 20: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. - Page 21 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. Pivot the frame down- ward until the catch is past the latch pin. 2.
-
Page 22: Troubleshooting
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If you need further assistance, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. - Page 23 With the help of a second person, carefully raise the Uprights (70, 76) as shown. Carefully pivot the Hood (41) off. Locate the Reed Switch (39) and the Magnet (6) on the left side of the Pulley (7). Turn the Pulley until the Magnet is aligned with the Reed Switch.
-
Page 24: Conditioning Guidelines
CONDITIONING GUIDELINES WARNING: Before beginning this or any exercise program, consult your physi- cian. This is especially important for individu- als over the age of 35 or individuals with pre- existing health problems. The pulse sensor is not a medical device. Various factors, including your movement, may affect the accuracy of heart rate readings. - Page 25 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
-
Page 26: Part List
PART LIST—Model No. HRTL61706.0 To locate the parts listed below, see the EXPLODED DRAWING on pages 28 to 31. Key No. Qty. Description Foot Rail Cover Foot Rail Cover Screw Left Foot Rail Frame Pivot Bolt Front Platform Bolt Magnet... -
Page 27: Ordering Replacement Parts
• the MODEL NUMBER of the product (HRTL61706.0) • the NAME of the product (HealthRider PRO H450i treadmill) • the SERIAL NUMBER of the product (see the front cover of this manual) • the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING on pages 26 to 31) Key No. - Page 28 EXPLODED DRAWING A—Model No. HRTL61706.0 R0806A...
- Page 29 EXPLODED DRAWING B—Model No. HRTL61706.0 R0806A...
- Page 30 EXPLODED DRAWING C—Model No. HRTL61706.0 R0806A...
- Page 31 EXPLODED DRAWING D—Model No. HRTL61706.0 R0806A...
-
Page 32: Limited Warranty
LIMITED WARRANTY WHAT IS COVERED—The entire HealthRider PRO H450i treadmill (“Product”) is warranted to be free of all defects in material and workmanship. WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.