Fujitsu PRIMEQUEST 2000 Series Tool Reference page 278
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
MMB CLI (Command Line Interface) Operations
Command
MMB configuration and other
set active_mmb
show active_mmb
exit
help
Command termination code display
show exit_code
Firmware revision status/version check
show update_status
Network survey commands
netck traceroute
netck arptbl
netck arping
netck ifconfig
netck stat
REMCS-related commands
set maintenance_ip
show maintenance_ip
Thotadd partition
hotremove partition
set partition dynamic_reconfiguration
show partition dynamic_reconfiguration
TABLE 2.4 MMB CLI commands (Partition Operator)
Command
Power control
power off
power on
Partition control
sadump
reset
nmi
Partition connection
console
Partition creation
add partition
remove partition
show partition configuration
set partition home
show partition home
set partition memory_operation_mode
show partition memory_operation_mode
set partition memory_mirror_ras_mode
Operator
Sets the active MMB.
Permitted
Displays the active MMB.
Permitted
Logs out from the MMB.
Permitted
Help information
Permitted
Displays the termination code for the last command
executed.
Displays the batch firmware update progress.
Permitted
Displays a list of network routes.
Permitted
Displays the physical Ethernet address.
Permitted
Displays the physical Ethernet address.
Permitted
Displays the network environment setup status.
Permitted
Displays a list of port numbers being used.
Sets the REMCS network.
Permitted
Displays the REMCS network setting.
Dynamic Reconfiguration HotAdd.
Dynamic Reconfiguration HotRemove.
Permitted
Sets DR state of partition.
Permitted
Displays DR state of partition.
Partition
Partition
Operator (*)
Operator (*)
(Same
(Other
partition)
partition)
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted
Outline
Outline
Turns the power off.
Turns the power on.
sadump instruction
Hard Reset instruction
NMI interrupt instruction
Text Console connection to partition
Adds a partition component.
Removes a partition component.
Displays the partition configuration.
Sets the Home SB.
Displays the Home SB.
Sets Memory operation mode.
Displays Memory operation mode.
Sets Memory operation at Mode.
Table of Contents
