Table 1.142 [Power Control] Window Buttons - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
MMB Web-UI (Web User Interface) Operations
Items
Force Power Off Delay
Boot Selector
TABLE 1.142 [Power Control] Window Buttons
Buttons
Apply
When you click the [Apply] button, the information of power control items is set.
Confirm the setting contents if dialog box prompts for Confirmation.
Cancel
When you click the [Cancel] button, returns to source without setting the information of power
control items corresponding to partition,.
Remarks
When the operating system supports the ACPI, the operating system can be shutdown by the above
mentioned Power Off operation and the power can be turned off. When the operating system is not
supported by the ACPI, the power is turned off without shutting down the operating system. Moreover, when
the application which is operating in the operating system is not supported even if the operating system is
supported by the ACPI, the power cannot be turned off. Since this is according to the operating system and
application specifications, for details, see the Operating System and Application Manual.
(1)
Menu Operation
[System] – [Power Control]
(2)
Window Operations
1.
Click the [Status Clear] button. Selects the power control items related to each partition from the pull-
down list of [Power Control]. Then click the [Apply] button.
Dialog box for setting confirmation appears.
2.
Click [OK] button to execute the settings.
[Message]
This section describes the messages to be displayed on this window.
Message Number
NMI: Produces the NMI interruption for the system.
Force Power Off: Turns off the power forcefully.
sadump: Specifies the SADUMP for the system.
(Not specified): There is no instruction for this system.
Specifies whether to enforce power off, when power off is done without proper
operation of the shutdown instruction for the operating system by [Power Off]
on the partition. In case enforced power off has been specified, the specified
time (1~9 minutes) can be set. The system is forcibly powered off when the
specified time has lapsed.
The default setting of check box is Off.
Specifies the boot device for which the Boot Manager setting of BIOS is
Override temporarily. Select the device to be boot from pull-down menu.
No Override: Boots by the EFI Boot Manager settings.
Force boot into EFI Boot Manager: Waiting for input by the EFI Boot
Manager. Boot by selecting the boot device from the EFI Boot Manager
Force PXE/iSCSI: Overrides the EFI Boot Manager settings, forcibly tries
the PXE.
Force boot from DVD: Overrides the EFI Boot Manager settings, and
forcibly tries the booting from the System DVD.
Default setting is 'No Override'.
This setting is applied only for the first system boot setting the value. After the
system boots, this setting automatically returns to 'No Override'. Therefore, it
is necessary to set the boot for system. In case of constant setting, it is set in
the Boot Manager of the UEFI.
Description
Description
Message
Table of Contents
