Table 2.10 Mmb Cli Commands (Operator) - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
MMB CLI (Command Line Interface) Operations
Command
show exit_code
Firmware revision status/version check
show update_status
Network survey commands
netck traceroute
netck arptbl
netck arping
netck ifconfig
netck stat
REMCS-related commands
set maintenance_ip
show maintenance_ip
DR-related
hotadd partition
hotremove partition
set partition dynamic_reconfiguration
show partition dynamic_reconfiguration
TABLE 2.3 MMB CLI commands (Operator)
Command
Power control
power off
power on
Partition control
sadump
reset
nmi
Partition connection
console
Partition creation
add partition
remove partition
show partition configuration
set partition home
show partition home
set partition memory_operation_mode
show partition memory_operation_mode
set partition memory_mirror_ras_mode
show partition memory_mirror_ras_mode
set partition pci_address_mode
show partition pci_address_mode
set partition lan_device_mode
show partition lan_device_mode
show partition mirror_mode
set partition name
Administrator
Permitted
Displays the termination code for the last command
executed.
Permitted
Displays the batch firmware update progress.
Permitted
Displays a list of network routes.
Permitted
Displays the physical Ethernet address.
Permitted
Displays the physical Ethernet address.
Permitted
Displays the network environment setup status.
Permitted
Displays a list of port numbers being used.
Permitted
Sets the REMCS network.
Permitted
Displays the REMCS network setting.
Permitted
Dynamic Reconfiguration HotAdd.
Permitted
Dynamic Reconfiguration HotRemove.
Permitted
Sets DR state of partition.
Permitted
Displays DR state of partition.
Operator
Permitted
Turns the power off.
Permitted
Turns the power on.
Permitted
sadump instruction
Permitted
Hard Reset instruction
Permitted
NMI interrupt instruction
Permitted
Text Console connection to partition
Adds a partition component.
Removes a partition component.
Permitted
Displays the partition configuration.
Sets the Home SB.
Permitted
Displays the Home SB.
Permitted
Sets Memory operation mode.
Permitted
Displays Memory operation mode.
Permitted
Sets Memory operation at Mode.
Permitted
Displays Memory operation at Mode.
Permitted
Sets PCI bus number allocation mod.
Permitted
Displays PCI bus number allocation mod.
Permitted
Sets LAN device mode.
Permitted
Displays LAN device mode.
Permitted
Displays the Mode setting.
Sets the partition name.
Outline
Outline
Table of Contents
